User manual - Basic_43W_E

E-25
Troubleshooting
English
The projector does
not project any
image from the
connected device.
The connected computer or video device may not be
turned on, or it may not be outputting a video signal.
➔ Make sure the connected computer or video
device is turned on, and perform the required
operation on it to output a video signal.
—
The correct input source is not selected on the
projector.
➔ On the projector, select the input source that
corresponds to the device whose image you are
trying to project (see “Selecting the Input
Source”).
page E-19
The projector does
not correctly project
the image from the
connected device.
Images may not project correctly when you have the
component output terminal of a video device
connected to the COMPUTER terminal of the projector.
➔ Try using the projector’s AV terminal (see
“Connecting to a Standard Video Device”).
page E-15
When RGB/
Component is
selected as the input
source, the color of
the projected image
or the image itself is
abnormal.
The wrong option (“Component” or “RGB”) may be
selected for the “Input Settings J COMPUTER
Terminal” setting on the setup menu. The image will
not be projected correctly if “Component” is selected
while the projector’s COMPUTER terminal is connected
to the RGB output terminal of a computer, or if “RGB”
is selected while the projector’s COMPUTER terminal
is connected to the component video output terminal
of a video device.
➔ Use the setup menu to change the “Input
Settings J COMPUTER Terminal” setting to
“Auto” to correct the problem.
User’s Guide
(UsersGuide_
English.pdf)
I can’t understand
messages or menus
because they are the
wrong language.
Perform the following operation to select the language
you want.
1. Press the [MENU] key to display the setup menu.
2. Press [T] five times and then press the [ENTER]
key.
3. Press [T] six times and then press the [ENTER]
key.
4. Use the [T] and [S] keys to move the highlighting
to the language you want to select and then press
the [ENTER] key.
5. Press the [MENU] key to exit the setup menu.
User’s Guide
(UsersGuide_
English.pdf)
Problem Cause and Recommended Action See