User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- Getting Ready
- Unpacking
- Operation Flow to Projection
- General Guide
- Key and Indicator Panel
- Back Terminals
- Placing the Projector on a Desk or on the Floor
- Connecting with Another Device
- Connecting a Computer
- Connecting to a Video Device
- Outputting Audio from the Projector to Another Device
- Connecting a Microphone (XJ-UT Series, XJ-F21XN, XJ-F211WN, XJ-S400UN, XJ-S400WN)
- Connecting to a Network with a LAN Cable (Network Models Only)
- Connecting a Wireless Adapter (Network Models Only)
- LOGO Terminal (Firmware Updates, User Logo Transfers)
- Connecting a Scientific Calculator (Network Models Only)
- SERIAL Terminal (Projector Control Using Commands)
- USB Power
- Cover Included with the YW-41 Wireless Adapter
- Attaching and Removing the Cable Cover (XJ-UT Series)
- Remote Controller
- Operating the Projector
- Turning the Projector On or Off
- Selecting an Input Source (INPUT)
- Using Auto Projection Off
- Basic Image and Audio Operations During Projection
- Flipping the Projected Image Horizontally (Mirror Mode)
- Light Control
- Digital Screen Shift
- Projecting a Template
- Test Pattern Projection
- Control Panel Lock
- Configuring Remote Control ID and Projector ID Settings
- Using the Countdown Timer (TIMER)
- Using the Presentation Timer (TIMER)
- Using the Setup Menu (MENU)
- Using a Password
- Cleaning the Projector
- Troubleshooting
- Appendix
- Supplying USB Power to Another Device
- Mounting the Projector on a Wall (XJ-UT Series)
- Hanging the Projector from a Ceiling
- Using the MONITOR OUT Terminal (XJ-UT Series, XJ-S400UN, XJ-S400WN)
- Projection Distance and Screen Size
- Aspect Ratio Setting and Projection Image
- Supported Signals
- Projector RS-232C Control
- Specifications
38
You can use the projector to supply USB power to another device. See “Supplying USB Power to
Another Device” (page 76).
The YW-41* wireless adapter comes with an anti-theft cover that can be installed on an XJ-F Series or
XJ-S Series model.
* The YW-41 wireless adapter may have been provided with your projector or may be available
separately. See “Unpacking” (page 21).
XJ-F Series/XJ-S Series
After plugging the wireless adapter into the projector, install the wireless adapter cover as required.
Cover the wireless adapter with the wireless adapter cover and then secure it with the screw.
XJ-UT Series
The cover that comes with the wireless adapter cannot be installed on an XJ-UT Series model. To
protect against theft of the wireless adapter while it is connected to the projector, use the cable cover
(page 39) that comes with the projector.
USB Power
Cover Included with the YW-41 Wireless Adapter
*
Caution
Keep the wireless adapter and the wireless adapter cover out of the reach of
small children. Accidental swallowing of the adapter can interfere with proper
breathing and create a life-threatening situation.
XJ-F Series XJ-S Series
Wireless adapter cover
Screw
Wireless adapter cover
Screw
The wireless adapter can be connected
to the lower USB-A port only.