User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- Getting Ready
- Unpacking
- Operation Flow to Projection
- General Guide
- Key and Indicator Panel
- Back Terminals
- Placing the Projector on a Desk or on the Floor
- Connecting with Another Device
- Connecting a Computer
- Connecting to a Video Device
- Outputting Audio from the Projector to Another Device
- Connecting a Microphone (XJ-UT Series, XJ-F21XN, XJ-F211WN, XJ-S400UN, XJ-S400WN)
- Connecting to a Network with a LAN Cable (Network Models Only)
- Connecting a Wireless Adapter (Network Models Only)
- LOGO Terminal (Firmware Updates, User Logo Transfers)
- Connecting a Scientific Calculator (Network Models Only)
- SERIAL Terminal (Projector Control Using Commands)
- USB Power
- Cover Included with the YW-41 Wireless Adapter
- Attaching and Removing the Cable Cover (XJ-UT Series)
- Remote Controller
- Operating the Projector
- Turning the Projector On or Off
- Selecting an Input Source (INPUT)
- Using Auto Projection Off
- Basic Image and Audio Operations During Projection
- Flipping the Projected Image Horizontally (Mirror Mode)
- Light Control
- Digital Screen Shift
- Projecting a Template
- Test Pattern Projection
- Control Panel Lock
- Configuring Remote Control ID and Projector ID Settings
- Using the Countdown Timer (TIMER)
- Using the Presentation Timer (TIMER)
- Using the Setup Menu (MENU)
- Using a Password
- Cleaning the Projector
- Troubleshooting
- Appendix
- Supplying USB Power to Another Device
- Mounting the Projector on a Wall (XJ-UT Series)
- Hanging the Projector from a Ceiling
- Using the MONITOR OUT Terminal (XJ-UT Series, XJ-S400UN, XJ-S400WN)
- Projection Distance and Screen Size
- Aspect Ratio Setting and Projection Image
- Supported Signals
- Projector RS-232C Control
- Specifications
32
Analog RGB Connection
With this type of connection, the RGB cable inputs only the image signal of the computer. If you also
want to output audio from the computer, you will need to connect an audio cable.
Note
An XJ-UT Series model, XJ-S400UN, or XJ-S400WN has a
MONITOR OUT terminal that
lets you directly output the signal being input to the
COMPUTER IN 1 terminal or
COMPUTER IN 2 terminal to an external display. For details, see “Using the MONITOR OUT
Terminal (XJ-UT Series, XJ-S400UN, XJ-S400WN)” (page 78).
The relationship between the image output terminal and audio output terminal can be
changed as required. Note that the combinations shown in the table are initial default settings.
For details, see “Relationship Between Image Input and Audio Input” (page 45).
With this type of connection, connect to the HDMI, component video, or composite video terminal of
the video device.
HDMI Connection
With this type of connection, the video signal and audio signal from the video device are input
simultaneously using a single cable.
Projector Terminal Connection Cable Computer Terminal
COMPUTER IN 1*
2
or
COMPUTER IN 2
Analog RGB Out (VGA)
terminal
AUDIO IN 1*
3
or
AUDIO IN 2
Headphones jack or
other audio output jack.
*2 An XJ-F Series model, XJ-S400U, or XJ-S400W has a COMPUTER IN terminal only.
*3 An XJ-F Series model, XJ-S400U, or XJ-S400W has an AUDIO IN terminal only.
Connecting to a Video Device
XJ-UT Series XJ-F Series XJ-S Series
Projector Terminal Connection Cable Video Device Terminal
HDMI 2
or
HDMI 1*
1
HDMI Out terminal
*1 An XJ-UT312WN model has an HDMI terminal only.
RGB cable (D-Sub 15-pin cable)
15-pin Mini D-Sub
Audio cable
Stereo mini jack
HDMI cable
HDMI Type A