User Manual
Table Of Contents
- Contents
- Establishing a Network Connection Between the Projector and a Computer
- Establishing a Direct Wireless LAN Connection Between a Computer and the Projector
- Using a Wired LAN Connection to Connect the Projector to an Existing Network
- Connecting the Projector to an Existing Wireless LAN Access Point
- Using the Projector as a NAT Router (Simultaneous Use of Wireless LAN and Wired LAN)
- Using the Remote Controller to Configure Projector Network Settings
- Using a Computer to Configure Projector Network Settings
- Preparing for C-Connection
- Network Projecting a Computer Screen Image (Using C-Connection)
- C-Connection Details
- Advanced Operations
- Controlling the Projector from an External Network Device
- Ports Used for TCP/UDP
44
The operations described in the table below can be performed using the menu bar of the macOS
version C-Connection.
C-Connection Menu Bar (macOS)
Menu This menu item: Does this:
C-Connection About C-Connection Displays C-Connection version information and copyright information.
Preferences Displays the Preferences dialog box. For details, see “C-Connection
Settings” on page 45.
Quit C-Connection Exits C-Connection.
View Discover List Same operation as the button. See “List Panel Common Buttons”
(page 42).
Favorites List Same operation as the button. See “List Panel Common Buttons”
(page 42).
Controls Disconnect Terminates the connection between C-Connection and the projector.
Play/Pause Starts computer screen projection. If projection is already in progress,
this menu item toggles between project and pause.
Stop Stops computer screen projection.
Split Screen Toggles the projection layout between “Auto Layout” and “Full
Screen”. For details, see “Simultaneous Projection of Images from
Multiple Computers on a Single Projector” (page 40).
Mute Same operation as the button. See “Info Panel and Mini Panel
Common Buttons” (page 43).
Window Minimize Minimizes the C-Connection window.
Mini Panel Switches to the mini panel.
Always on Top Specifies whether or not the C-Connection window should always be
kept on top of other windows. The C-Connection window is always
kept on top of other windows when there is a check mark (✔) next to
this item.*
* Even if this setting is enabled, the C-Connection window may not be
displayed on top while the full-screen view of another application’s
window is displayed.
C