User Manual

36
Network Projecting a Computer Screen Image
(Using C-Connection)
Use C-Connection to perform network projection of a computer screen image. To perform the
operations in this section, you must first perform the operations below.
C-Connection installed on the computer (page 32).
Network connection between a computer and the projector (page 6).
Important!
Some functions are limited with the Chrome OS version of C-Connection. Before using the
Chrome OS version of C-Connection, be sure to read the information under “Differences in
Functions Provided by the Chrome OS Version of C-Connection” (page 48).
To perform the operation below, first obtain a One Click Connection file for the projector you plan to
use for network projection. A One Click Connection file can be obtained from your network
administrator or downloaded using the procedure under “Creating a One Click Connection File” (page
32) from the projector to be used for projection.
To project using a One Click Connection file
1.
On the projector, display the network standby screen.
2.
On the computer, open the One Click Connection file.
This starts up C-Connection. Network projection to the projector will start, and the
C-Connection window (Info Panel, page 42) will appear.
Projecting with One Click Connection
B