User`s guide

33
Option Settings 2 Main Menu
Language RCVHDWUN Single Use this sub-menu to specify the language to use for messages,
setup menus, etc.
English / French / German / Italian / Spanish / Swedish /
Chinese (Simplified) / Chinese (Traditional) / Korean / Japanese
Restore Menu
Defaults
RCVHDWUN Single This sub-menu returns all of the sub-menu items on the Option
Settings 1 main menu to their initial default settings.
 The language setting and the password are not returned to their
initial factory defaults.
 The “Auto Adjust” item is returned to its initial default only when
RGB input is selected for the input source. All of the other items
are returned to their initial defaults regardless of the currently
selected input source.
Setting Name Input Setting Unit Description
Zoom Memory
RCVHDWUN Single Use this sub-menu to turn zoom memory on or off. Zoom memory
lets you save the zoom setting when the projector is turned off, so
it can be restored automatically the next time the projector is
turned on.
On*:
Select this option when you want to restore the zoom setting
that was in effect when the projector was last turned off,
whenever it is turned on.
Off:
Select this option when you want the image to be projected at
its maximum size whenever you turn on the projector.
Note
Zoom Memory does not function if the projector is turned
off by unplugging its power cord from the power outlet
without pressing the [P] (Power) key.
Pointer
RCVHDWUN Single Use this sub-menu to specify the type of pointer that appears first
when you press the [POINTER] key.
HDMI Audio
Out
RCVHDWUN Single Specifies whether the input audio signal should be output from the
projector’s built-in speaker or to the line output.
Speaker*:
Outputs the audio signal being input to the HDMI port from the
speaker.
Line:
Outputs the audio signal being input to the HDMI port from the
AV terminal.
Plug and Play
(USB port
models only)
RCVHDWUN Single Use this sub-menu to turn plug-and-play
*1
on or off.
On*:
Select this option to turn on plug-and-play. This will allow the
projector detect when an external USB device is connected and
make that device the input source automatically.
Off:
Select this option to turn off plug-and-play.
Setting Name Input Setting Unit Description