IN DATA PROJECTOR XJ-A142 / XJ-A147* XJ-A242 / XJ-A247* XJ-A252 / XJ-A257* * USB models • Some models covered by this User’s Guide may not be available in certain geographic areas. English Setup Guide z Be sure to keep all user documentation handy for future reference. z To obtain the latest version of this manual visit the website at the URL below. https://world.casio.
Contents Safety Precautions ....................................IN-1 Quick Guide ............................................. IN-11 Operating Precautions ..............................IN-6 Specifications .......................................... IN-12 General Guide ..........................................IN-10 Unpacking As you unpack the projector, check to make sure that all of the items listed below are present.
Safety Precautions Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to use it. After reading this User’s Guide, keep it in a safe place for future reference. About safety symbols Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below.
Safety Precautions ● Power cord + ● Water and foreign matter Misuse of the power cord creates the risk of fire and electric shock. Make sure that you always observe the following precautions. • Be sure to use only the accessories that come with the projector. • Make sure that you use a power source with the same voltage as that specified for the projector. • Do not overload a power outlet with too many devices. • Do not locate the power cord near a stove.
Safety Precautions ● Disposal by burning - ● Exhaust vents Never try to dispose of the projector by burning it. Doing so can cause an explosion, which creates the risk of fire and personal injury. ● Projector light emission - • Never look directly into the lens, intake vents, or exhaust vents while the light is on. When turning on the projector, check to make sure that no one is looking directly into its lens, intake vents, or exhaust vents.
Safety Precautions ● Using the projector on a base with casters * Caution Whenever using the projector on a base that has casters, make sure that you lock the casters when not moving the base. ● Lightening During a lightening storm, do not touch the plug of the projector’s power cord. ● Remote controller ! + Never try to take the remote controller apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury.
Safety Precautions Battery Precautions Lens Cover * Danger * Warning + Should liquid leaking from an alkaline battery get into the eyes, immediately take the following steps. 1. Do not rub the eyes! Wash the eyes with clean water. 2. Contact a physician immediately. Failure to take immediate action can lead to loss of eyesight. + The lens cover of this Data Projector uses a magnetic attachment.
Operating Precautions About the Light Source Unit The projector’s light source unit uses a laser and LED. The life of the light source unit is rated at approximately 20,000 hours. The actual life will depend on use conditions, the settings configured on the setup menu, and differences between each individual light source unit. The light source unit is warranted for the period noted on the warranty certificate or for 6,000 hours, whichever comes first.
Operating Precautions Vent Outlets • Vent outlets become very hot during projection. Never touch vents or allow them to become blocked. • Do not insert foreign objects. Bottom Projector Light Emission • Never look directly into the lens while the light is on.
Operating Precautions Other Precautions This projector is made of precision components. Failure to observe the following precautions can result in inability to correctly save data and malfunction. ● Never use or store the projector in the following locations. Doing so creates the risk of malfunction of and damage to the projector.
Operating Precautions ● Keystone Correction and Image Quality Performing keystone correction causes the image to be compressed before it is projected. This can result distortion of the image or a loss of image quality. If this happens, change orientation of the projector and/or screen so it conforms as much as possible to the illustration under “Setting Up the Projector” in the User’s Guide.
General Guide CLASS 1 LASER PRODUCT Indicators [P] (Power) key Brightness sensor Control panel Intake vents Intake vents Lens cover (Magnetic attachment to projector) Exhaust vents Projection lens Remote control signal receiver Release button Front foot Rear feet Control Panel and Indicators TEMP indicator [FOCUS] key [ENTER] key LIGHT indicator [MENU] key POWER/STANDBY indicator [ESC] key [P] (Power) key Cursor keys (q/w/U/I) [INPUT] key [ZOOM] key [AUTO] key IN-10
Quick Guide This section explains the operational flow up to the point that projection is started. For more individual operations, see the User’s Guide (UsersGuide.pdf). 1. Load batteries into the remote controller. ☞ “To load remote controller batteries” (User’s Guide) 2. Place the projector onto a table, desk, or stand that is level and firm, making sure that you allow enough room around it.
Specifications Model Name XJ-A142/XJ-A147 Display Chip XJ-A242/XJ-A247 XJ-A252/XJ-A257 DLP® chip × 1, DLP® system Display system Chip Size Number of Pixels XGA 1.40cm (0.55") diagonal (Aspect ratio: 4:3) WXGA 1.65cm (0.65") diagonal (Aspect ratio: 16:10) 786,432 (1024 × 768) 1,024,000 (1280 × 800) Projection Lens 2X power zoom, power focus F 2.29-3.09 / f 15.9-30.8 Light Source Laser and LED Projected Image Size Projection Distance 0.38m (15") to 7.62m (300") 0.46m (18") to 7.
Specifications Model Name XJ-A142/XJ-A147 XJ-A242/XJ-A247 XJ-A252/XJ-A257 Operating Humidity 20 to 80% (non-condensation) Operating Altitude 0 to 3,000 meters (0 to 10,000 feet) above sea level Power Requirements 100 to 240VN(AC), 50/60Hz Power Consumption (100 to 240V) Eco Level 1 when Eco Mode is “On” 115W 120W Eco Level 5 when Eco Mode is “On” 70W 75W When “Bright” is selected for Eco Off Mode. 155W 165W When “Normal” is selected for Eco Off Mode.
Specifications GPL and LGPL (for USB port model users) (1) This product uses software (This Software) that comes under the GNU General Public License (GPL) and GNU Lesser General Public License (LGPL). In accordance with the GPL and LGPL, the source code of This Software is open source code. Anyone who wishes to view the open source code can do so by downloading it from the CASIO Projector download site.
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Information This device, Wireless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: Casio Europe GmbH Casio-Platz 1, 22848 Norderstedt, Germany www.casio-europe.
Printed in Japan MA2008-B L030SET1-IN
