User's Guide

Note
●
If the watch is paired with an Android phone, you can use watch menu
operations to start up the phone’s Google Calendar.
1. Display the Activity app “START” screen.
2. Swipe the touch screen from bottom to top. On the menu that appears,
tap the following in sequence: “History/Route Import”, “View History on
Phone”.
Data Displayed During Measurement Operations
Note the points below concerning the data displayed while a measurement
operation is in progress.
●
For information about procedures to calibrate the barometric pressure and
altitude values displayed by the Activity app to make them more accurate,
read “Common Outdoor Function Settings” and then refer to the following
items: “Barometric Pressure Calibration”, “Altitude Calibration”, and
“Correct Altitude Using Location”.
●
Since speed and distance traveled are measured using the watch’s or your
smartphone’s GPS function, location measurement error may result in
measured value error.
●
Speed and distance are calculated at regular intervals, so there may be
some lag before values are displayed.
●
If the watch is not able to acquire location information (GPS) at the start of
an Activity measurement operation, “----” will be displayed in place of the
measurement value.
EN-73