User's Guide

All Off (MS)
Operation
1.
Tap this item and a confirmation dialog box will appear asking if you want
to disable all MOMENT SETTER notifications.
2.
Tap “Turn off.” to disable notifications or “Cancel” to leave notifications
enabled.
Description
Removing all check marks from the MOMENT SETTER app menu disables
all notifications. Note that once you perform this operation, there is no single
batch operation to re-enable notifications. You will need to use the MOMENT
SETTER app menu to individually re-enable each notification you want.
Route Display (LM)
For information about this item, see “Enabling Route Tracking on the Map
(Route Display)”.
Revisit (LM)
For information about this item, see “Changing the “Revisit” Mark Notification
Setting”.
Total Maximum Heart Rate (WF/MS/AC)
Operation
1.
From the “Heart Rate” watch face or Activity app, display the settings menu
and then tap “Total Maximum Heart Rate”.
2.
Select either “Calculate from Birth Month” or “Manual Setting”.
3.
Selecting “Manual Setting” will display an input screen. Use and
to manually specify a maximum heart rate and then tap .
Description
The Total Maximum Heart Rate setting can be configured automatically
based on the birth information you input, or manually. To specify a total
maximum heart rate manually, input a value in the range of 20 to 220. The
value you input will be used to calculate heart rate zones. For normal daily
training, initially select “Calculate from Birth Month”, which generally will set
a relatively low value. After training for some time, you should be able to get
a grasp of the maximum heart rate that is best for you, so you will be able to
select “Manual Setting” and specify the value you want.
EN-102