Operation Manual
Table Of Contents
- Contents
- Watch Features
- Measurement Functions
- Overview
- Getting Ready
- Basic Operations (Android Wear)
- Turning Power On or Off
- Home Screen
- Wake Up
- Home Screen Icons
- Using the Settings
- Notifications (Card and Vibration)
- Incoming Phone Call Notifications
- Temporarily Blocking All Notifications and Disabling the Backlight (Theater mode)
- Temporarily Boosting Touch Screen Brightness
- Controlling the Watch by Voice Commands
- Using Apps
- Adding Apps and Watch Faces
- Available Functions when not Connected to a Smartphone
- Wi-Fi connectivity
- Restoring Connection with a Smartphone
- Smartphone Location Information Settings
- Doze Mode
- Watch Faces
- Using the TOOL App (TOOL Button)
- Basic TOOL App Operations
- TOOL App Color Display and Monochrome Display
- Using Compass
- Using Barometer
- Using Altimeter
- Using Sunrise/sunset (When connected with an Android smartphone only)
- Using Tide Graph (When connected with an Android smartphone only)
- Using My Graph (When connected with an Android smartphone only)
- Using the APP Button
- Using the Activity App (When connected with an Android smartphone only)
- Common CASIO App and CASIO Watch Face Settings
- Using the CASIO MOMENT SETTER+ App on a Smartphone (Android Only)
- Installing the CASIO MOMENT SETTER+ App on a Smartphone
- Watch Face Switching and Advanced Setting Configuration
- TOOL Button and TOOL App Settings
- APP Button Settings
- Registration Details
- Using MOMENT SETTER
- Practical Application 1: Using the “Climbing, trekking”: “Every 1000 steps, display "Take a break.".” MOMENT SETTER item
- Practical Application 2: Using the “Cycling”: “When stopped, display the distance travelled thus far.” MOMENT SETTER item
- Practical Application 3: Using the “Extras”: “When phone battery becomes 20 % or lower, display a low battery alert.” MOMENT SETTER item
- Using the Timepiece App
- Monochrome LCD Screen
- Error Code and Error Message List
- Restoring Watch Operation
- Precautions During Use
- User Maintenance
- Main Specifications
- Chargeable Battery Handling
- Supplementary Information
Screen while Measurement is in Progress
Climbing, trekking
①
③
②
④
⑤
A
Difference in altitude between the current reading and the reading 60
minutes before. If the current measurement was started less than 60
minutes ago, this value shows an approximate 60-minute value
calculated based on the current reading and the first reading.
B
Current time.
C
Input target altitude.
D
Difference between target altitude and current altitude.
Rmng: Current altitude is less than target.
–: Current altitude is greater than target.
E
Time elapsed from start of measurement.
Note
●
To correct the current altitude used for A
and
D above, use the altimeter
function included in the watch’s TOOL app. For information about the
correction operation, refer to “To perform altitude reading calibration
manually”.
●
The altitude difference A is
based
on barometric pressure measurements
that are calculated to altitude values. Barometric pressure values and their
calculated altitude values can be affected by weather conditions.
EN-79