Operation Manual
Table Of Contents
- Contents
- Watch Features
- Measurement Functions
- Overview
- Getting Ready
- Basic Operations (Android Wear)
- Turning Power On or Off
- Home Screen
- Wake Up
- Home Screen Icons
- Using the Settings
- Notifications (Card and Vibration)
- Incoming Phone Call Notifications
- Temporarily Blocking All Notifications and Disabling the Backlight (Theater mode)
- Temporarily Boosting Touch Screen Brightness
- Controlling the Watch by Voice Commands
- Using Apps
- Adding Apps and Watch Faces
- Available Functions when not Connected to a Smartphone
- Wi-Fi connectivity
- Restoring Connection with a Smartphone
- Smartphone Location Information Settings
- Doze Mode
- Watch Faces
- Using the TOOL App (TOOL Button)
- Basic TOOL App Operations
- TOOL App Color Display and Monochrome Display
- Using Compass
- Using Barometer
- Using Altimeter
- Using Sunrise/sunset (When connected with an Android smartphone only)
- Using Tide Graph (When connected with an Android smartphone only)
- Using My Graph (When connected with an Android smartphone only)
- Using the APP Button
- Using the Activity App (When connected with an Android smartphone only)
- Common CASIO App and CASIO Watch Face Settings
- Using the CASIO MOMENT SETTER+ App on a Smartphone (Android Only)
- Installing the CASIO MOMENT SETTER+ App on a Smartphone
- Watch Face Switching and Advanced Setting Configuration
- TOOL Button and TOOL App Settings
- APP Button Settings
- Registration Details
- Using MOMENT SETTER
- Practical Application 1: Using the “Climbing, trekking”: “Every 1000 steps, display "Take a break.".” MOMENT SETTER item
- Practical Application 2: Using the “Cycling”: “When stopped, display the distance travelled thus far.” MOMENT SETTER item
- Practical Application 3: Using the “Extras”: “When phone battery becomes 20 % or lower, display a low battery alert.” MOMENT SETTER item
- Using the Timepiece App
- Monochrome LCD Screen
- Error Code and Error Message List
- Restoring Watch Operation
- Precautions During Use
- User Maintenance
- Main Specifications
- Chargeable Battery Handling
- Supplementary Information
Monochrome LCD Screen
Your watch has a dual-layer color and monochrome LCD. Switching between
monochrome and color LCD screens can be performed manually, but it is
also performed
automatically in certain cases. The following section explains
when the watch displays the monochrome LCD screen.
After entering the Timepiece Mode
The watch will use the monochrome LCD screen to display the current time
after you
enter the Timepiece Mode by running the Timepiece app (see “Using
the Timepiece App”).
Display Operations
●
The operations described below
can be performed in the
Timepiece Mode.
Pressing (and immediately
releasing) the power button:
Turns on the backlight.
Holding down the power button:
Exits the Timepiece Mode and
starts up Android Wear.
●
The watch does not perform any
notification operations
while in the
Timepiece Mode.
Important!
●
Android Wear operation stops whenever the watch charge level starts to
approach 0%. For a while after that happens, the watch will automatically
switch to the monochrome LCD screen that appears in Timepiece Mode.
The watch’s power button is completely disabled at this time. Charge the
watch as soon as possible when this happens. Android Wear will
automatically resume operation after the charge reaches a certain level.
EN-109