EN . WSD-F10 User’s Guide Thank you for purchasing this watch. Before trying to use this watch, be sure to read the Safety Precautions in the Quick Start Guide that comes with the watch. Make sure you use the watch correctly. Be sure to keep this manual handy for future reference. ● This watch can pair with a smartphone, tablet, or other device (all referred to as “smartphone” in this manual) running Android™ 4.3 or above or iOS 8.2 or above.
The contents of this manual are subject to change without notice. Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this manual for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD. ● CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual. ● CASIO COMPUTER CO., LTD.
Contents Watch Features ................................................................................. EN-4 Measurement Functions .................................................................. EN-6 Overview ............................................................................................ EN-8 Getting Ready ................................................................................... EN-9 Pairing with Another Smartphone ...............................................
Watch Faces .................................................................................... To change the watch face .......................................................... CASIO Watch Faces .................................................................. CASIO Watch Face Settings ...................................................... EN-30 EN-30 EN-31 EN-38 Using the TOOL App (TOOL Button) ............................................ EN-42 Basic TOOL App Operations .............................
Using the CASIO MOMENT SETTER+ App on a Smartphone (Android Only) ................................................................................................. EN-91 Installing the CASIO MOMENT SETTER+ App on a Smartphone .................................................................................................... EN-92 Watch Face Switching and Advanced Setting Configuration ...... EN-93 TOOL Button and TOOL App Settings ....................................... EN-95 APP Button Settings ..........
Watch Features This watch is a wearable terminal Powered by Android Wear. In addition to basic Android Wear capabilities to link up with a smartphone running Android 4.3 or above or iOS 8.2 or above, your watch is also designed to provide you with the toughness and performance expected from a piece of outdoor gear.
Special “CASIO MOMENT SETTER+” App for Even Greater Versatility Android smartphone users can get the “CASIO MOMENT SETTER+” app from the Google Play™ Store. This app lets you use your Android smartphone screen to configure detailed display settings and button function settings. A “MOMENT SETTER” function lets you configure the watch to display timely notifications to support your outdoor activities.
Measurement Functions Your watch can take barometric pressure, altitude, bearing, and other readings. Its built-in watch faces and applications can use readings for display and other useful functions. Note that this watch is not a special purpose measuring instrument. Readings produced by measurement functions are intended as general reference information only.
Altimeter, Barometer The watch’s Altimeter use a pressure sensor to measure barometric pressure, and then calculates and displays relative altitude based on the measured value. Because of this, readings taken at different times at the same location may produce different altitude values due to changes in temperature, humidity, barometric pressure, and other factors. Also note that values displayed by the watch may be different from elevations indicated for areas where you are located.
Overview Package Contents Watch, AC adaptor, charger cable, Quick Start Guide, warranty General Guide ① ② ⑤ ③ ⑥ ⑦ ⑧ ④ A Charge LED B Charger terminal C Pressure sensor D Microphone E TOOL button F Power button G APP button H Touch screen EN-8
Getting Ready After reading the “Safety Precautions” in the “Quick Start Guide”, perform the steps below. Before using this watch for the first time, perform steps 1. through 4. below in sequence. 1. Charge the Watch 1. Connect the provided charger cable to the AC adaptor, and then plug the AC adaptor into a power outlet. 2. Connect the charger cable to the watch charger terminal. The watch’s charge LED lights red while charging is in progress. The LED changes to green when the watch is fully charged.
2. Install the Android Wear App on a Smartphone 1. Search for “Android Wear” in the Google Play Store if you are using an Android smartphone, or the iTunes App Store if you are using an iPhone. 2. On the list of found apps that appears, select “Android Wear” (Google Inc.) On the screen that appears, tap “INSTALL”. ● Follow the instructions that appear on the screen to complete the installation.
● ● Important! Starting up CASIO MOMENT SETTER+ immediately after installing it may cause the following error message to appear: “The watch is being setup.” This means that installation of the app on the smart watch system (which is triggered automatically when you install the CASIO MOMENT SETTER+ app on your smartphone) is in progress. During this time, the watch screen will go black or watch screen response will become extremely slow. This does not indicate malfunction.
4. Configure Settings to Pair with the Smartphone (Pairing) 1. Move the smartphone you want to pair with close to the watch. ● When configuring pairing settings, it is recommended that you have the smartphone and watch within one meter of each other. 2. On the smartphone, start up the Android Wear app. If your smartphone is already paired with an Android Wear watch or if you are re-pairing with this watch, perform one of the procedures below after starting up the Android Wear app.
Pairing with Another Smartphone Your watch can be paired with a single smartphone at any time. Before pairing with a different smartphone, perform the steps below to unpair with the current smartphone. 1. Hold down the power button for about two seconds to display a list of apps. 2. Scroll the screen downwards and then tap “Settings”. 3. Scroll the screen downwards and then tap “Unpair with phone”. On the confirmation screen that appears, tap . ● ● This restarts the watch.
Basic Operations (Android Wear) This section explains basic operations of the Android Wear operating system that your watch uses. ● Important! Note that the operations described here are subject to change due to the type and version of the operating system being used by the smartphone connected with the watch, changes that occur when the watch’s operating system is updated, and other factors. For details about Android Wear operations, visit the website below. Android Wear Help Center https://support.
Home Screen The watch face screen is the Home Screen, which is the starting point of a variety of different operations. While the Home Screen is displayed, you can view notifications on a “card”, and launch operations using voice commands. The screenshot below shows the Home Screen with a card displayed. Watch face Card Wake Up If you don’t tap the touch screen for a few seconds, the watch screen will dim.
Using the Settings Settings can be used to adjust touch screen brightness and other settings, to unpair with a smartphone, and perform other operations. You can use any of the operations below to start up Settings. ● Hold down the power button for about two seconds to display a list of apps. Next, tap “Settings”. ● On the Home Screen, swipe downwards from the top. On the screen that appears, swipe from right to left until “Settings” is displayed, and then tap “Settings”.
Adjust brightness Change watch face Font size Gestures Always-on screen Wi-Fi Bluetooth Airplane mode Accessibility Date & time Screen lock Lock screen now Permissions Unpair with phone Restart Power off About Use this setting to select a value that sets the touch screen brightness. Use this setting to select the watch face that appears on the Home Screen. Use this setting to select one of three system font sizes. Specifies whether or not watch operations can be performed by rotating the wrist.
Notifications (Card and Vibration) When the watch receives a notification from the smartphone (incoming mail, Google Now™ notification, app notification, etc.), the watch displays a card and vibrates. Smartphone and watch settings can be configured to control what is notified and how notification is performed. Note ● Notification settings and operations depend on the connected smartphone operating system and versions, and other factors.
Blocking Notifications You can block or unblock notifications form a particular app, or even temporarily block all notifications. To block notifications from a particular app 1. On the Home Screen, display a card received from the app. 2. Swipe from right to left until “Block app” is displayed, and then tap it. 3. In response to the confirmation message that appears, . tap To unblock notifications 1. Open up the Android Wear app on your smartphone. 2. Tap D. 3. Tap “Block app notifications”.
Incoming Phone Call Notifications When a phone comes in on the smartphone, the watch displays a notification and vibrates. If the caller’s number is registered in contacts, the watch will display the caller’s name and image (when one is available). To accept the incoming call, swipe the touch screen from right to left. You will then be able to talk with the caller on the smartphone. To reject an incoming call, swipe the touch screen from left to right.
Temporarily Boosting Touch Screen Brightness Press the power button three times in quick succession to boost touch screen brightness for about five seconds. You can also perform the steps below. 1. Swipe downwards from the top edge of the Home Screen. 2. Swipe from right to left until “Brightness boost” is displayed, and then tap it. Controlling the Watch by Voice Commands You can use voice commands to the watch to perform operations such as those below.
To start a voice command operation While the Home Screen is displayed, say “OK Google” while facing the watch. This will display the “Speak now” prompt. Or you could swipe the Home Screen from right to left until “Speak now” is displayed, You can control the watch with voice commands while “Speak now” is displayed. Note ● Scrolling the screen downwards while “Speak now” is displayed will display a list of the voice commands, such as “Take a note”.
Using Apps The applications below are built into the watch under factory default settings. APP Button Fit Google Together Alarm Stopwatch Find my phone Flashlight Timer Timepiece TOOL Agenda Weather Translate Settings CASIO app. Use this app to specify the app that starts up when the watch’s APP button is pressed. Fitness application. Records and displays number of steps or activity (walking, running, bicycling, etc.) specific times and distances, and calories burned. Voice recognition app.
Note ● Depending on the smartphone the watch is paired with, some of the apps in the list above may not be available, and/or apps other than those above may be available. To start up an app 1. Hold down the power button for about two seconds to display a list of apps. 2. Scroll the list of apps upwards or downwards until the one you want is displayed, and then tap it. Note ● You can start up the watch’s TOOL app by pressing the TOOL button.
Example Operation 2: Using Flashlight 1. Hold down the power button for about two seconds to display a list of apps. Next, tap “Flashlight”. ● ● This brightly illuminates the entire touch screen. To temporarily turn off the light, tap the touch screen. To turn the light back on, tap the touch screen again. 2. To exit Flashlight, swipe the touch screen from left to right or press the power button. Example Operation 3: Searching for your smartphone (by sounding the smartphone’s paging tone) 1.
Adding Apps and Watch Faces If your watch is connected with an Android smartphone, you can add watch apps and watch faces. Perform one of the operations below on your Android smartphone. ● Go to the Android Wear app and tap “Watch faces [MORE]” or “Essential watch apps [MORE]”. ● Go to Google Play Store and search for “Android Wear Apps” or “Android Wear Watch Faces”. ● In Google Play Store, go to categories and select “Android Wear”.
Available Functions when not Connected to a Smartphone The functions listed below can be used on the watch even when it is not connected with a smartphone.
Wi-Fi connectivity For Android smartphones, you will have access to the greatest number of watch functions while it is connected to Wi-Fi and the smartphone is connected to the Internet. However, note that when using a Wi-Fi connection you need to be aware of the watch’s battery level and your surrounding environment. A low battery or extreme cold can cause Wi-Fi operation to shut down automatically to protect the watch’s system.
Smartphone Location Information Settings To use your smartphone’s GPS for distance, speed, area, and other measurement settings, perform the following operation on your smartphone: Open “Settings”, tap “Location”, use the switch to turn “Location” on, and then choose “High Accuracy” mode. If your smartphone does not have “High Accuracy” setting, turn on its GPS, Wi-Fi, and mobile network (data communication) settings.
Watch Faces Your watch comes with a total of 19 built-in watch faces: 12 standard Android Wear watch faces, plus seven CASIO original watch faces. You can select any one of these as desired. To change the watch face 1. On the Home Screen, hold your finger on the touch screen for about two seconds until the watch face contracts. 2. Swipe the touch screen from left to right to scroll though the available watch faces. When the one you want is displayed, tap it.
CASIO Watch Faces Details about the CASIO watch faces that come built in are described below. All of the screens below are those produced when there is a connection between the watch and a smartphone. 2 Layers Watch face that combines easy-to-read monochrome LCD and a color LCD.
Authentic Simple analog watch face. Three dials. Holding your finger on a dial (except for the B 24-hour dial) for a short while will cause the dial to cycle to the next type of data that can be displayed there. Note that if you hold your finger down too long, the watch face will contract and enable other watch face settings (see “To change CASIO watch face settings”).
World Time Shows the time in your current time zone and your Home City. ③ ① ② A Current location time and date, and city name (time zone name) B Time differences between current location and Home City C Home City current time and date, and city name (time zone name) Altitude Shows the high altitude recorded on the watch, and altitude changes for the past 24 hours.
Field Casual analog watch face. Two dials. Holding your finger on a dial for a short while will cause the dial to cycle to the next type of data that can be displayed there. Note that if you hold your finger down too long, the watch face will contract and enable other watch face settings (see “To change CASIO watch face settings”).
Multi Casual digital watch face. Three dials. Holding your finger on a dial for a short while will cause the dial to cycle to the next type of data that can be displayed there. Note that if you hold your finger down too long, the watch face will contract and enable other watch face settings (see “To change CASIO watch face settings”).
Combination Combination display of a color altitude graph and analog watch.
Compass Calibration (Magnetization Correction) To ensure proper operation of the watch’s compass, you need to perform magnetization correction whenever the “Perform magnetization correction.” card appears while the “Authentic”, “Field”, or “Multi” watch face is displayed. Perform the steps below. 1. Swipe the “Perform magnetization correction.” card from right to left. 2. Tap D. 3.
CASIO Watch Face Settings Many CASIO watch face settings affect both the watch face and CASIO apps. For example, if you use the watch face operation to change the “Monochrome Display” setting, the change will also be reflected by CASIO apps. This section explains how to use watch face operations to access settings that also affect CASIO apps.
Watch Face 2 Layers World Time Altitude Menu Item Monochrome Display (See “Changing the Monochrome Display Setting”.) ● Home City (See “To specify the home city for the “World Time” watch face”.) ● Altitude Calibration (See “Calibrating Altitude Readings”.) ● Correct Altitude Using Location*1 (See “Calibrating Altitude Readings”.) ● Units (See “Changing the Unit Setting”.) ● MAX Altitude Reset (See “To reset the high altitude value displayed by the “Altitude” and “Combination” watch faces”.
To specify the home city for the “World Time” watch face 1. Use the procedure under “To change the watch face” to change the watch face to “World Time”. 2. Hold your finger on the touch screen for about two seconds. When D appears, tap it. 3. Tap “Home City”. 4. What happens next depends on the type of smartphone that is connected with the watch. Android smartphone: Tapping “Home City” in step 3 automatically displays the home city selection screen of the CASIO MOMENT SETTER+ app on the smartphone.
To reset the high altitude value displayed by the “Altitude” and “Combination” watch faces 1. Use the procedure under “To change the watch face” to change the watch face to “Altitude” or “Combination”. 2. Hold your finger on the touch screen for about two seconds. When D appears, tap it. ● Performing the step below will reset the high altitude value (shared by the “Altitude” and “Combination” watch faces) stored in watch memory.
Using the TOOL App (TOOL Button) The TOOL app is a built-in app by CASIO. It provides the six functions described below. Compass Indicates directions and your bearing. Altimeter Measures altitude. You can also view changes in altitude over the past 24 hours as a graph.
Barometer Measures barometric pressure. You can also view changes in barometric pressure over the past 24 hours as a graph. Sunrise/sunset *1 Shows the sunrise and sunset times and azimuths for your current location. Tide Graph *1 *2 Shows a tide graph of a preset point (port). This can be used as reference information for fishing.
My Graph *1 *2 Graphically represent the amount of time during the current date spent engaging in the following activities: resting, walking, running, riding. *1 Can be used only while the watch is connected with an Android smartphone that has CASIO MOMENT SETTER+ app installed. Cannot be used with an Android smartphone without CASIO MOMENT SETTER + app installed or with an iPhone. *2 Requires configuration of settings using CASIO MOMENT SETTER+ app. See “TOOL Button and TOOL App Settings” for details.
Basic TOOL App Operations To start up the TOOL app Press the TOOL button. To select a TOOL app function While the TOOL app is running, each press of the TOOL button cycles through available functions. You can also scroll through functions by swiping the touch screen upwards or downwards. Compass Altimeter My Graph Barometer Tide Graph Sunrise/sunset Note ● My Graph, Tide Graph, and Sunrise/sunset are displayed only while the watch is connected with an Android smartphone.
To change TOOL app settings 1. While the TOOL app is running, swipe the touch screen from right to left until the “Settings” screen is displayed. 2. Tap D. ● This displays a CASIO setting menu. 3. Tap the menu item for the setting you want to change. ● The table below describes the items displayed on the menu. For details, refer to the section indicated for each menu item.
TOOL App Color Display and Monochrome Display You can switch the TOOL app screen between color display and monochrome display. Outdoors in bright sunlight, the monochrome display provides better readability than the color display. To switch between color display and monochrome display Hold down the TOOL button for about three seconds. You can use any of the following operations to return to the color display; Hold down the TOOL button for about three seconds; Tap the touch screen; Swipe in any direction.
Using Compass Compass indicates direction and your bearing as shown below. Color Display ① ② Monochrome Display ③ ④ ⑤ A The center of the face shows letters* indicating the bearing that the watch’s 12 o’clock position is pointed, as well as an angle indicating how many degrees there are between 12 o’clock and north (0°). B Arrow indicating north. C Letters* indicating the bearing that the watch’s 12 o’clock position is pointed.
To lock the direction You can use Compass to lock the indicated direction to help you maintain a specific bearing while trekking, etc. While the watch’s 12 o’clock position is pointed in the direction you want, tap the touch screen. * * If the watch’s 12 o’clock position deviates from the locked direction, the amount of the deviation will be indicated in blue, as shown here. To unlock a direction, tap the touch screen again.
Magnetic North and True North North indicated by this watch under initial default settings is magnetic north. If you want the watch to indicate true north, you need to use an Android smartphone to configure required settings. See “TOOL Button and TOOL App Settings” for details. ● Important! Magnetic north is always indicated while the watch is connected with an iPhone. Changing to true north is not supported in this case.
Using Barometer Your watch displays barometric pressure based on readings taken by a builtin barometric pressure sensor.
Monochrome Display ⑧ ⑨ ⑩ A Current barometric pressure indicated by an arrow. The range of scale values shown will change in accordance with the current barometric pressure. B Shown when the barometric pressure is within the range of 900 to 1,100 hPa. Shows barometric pressure at ground level and the correlation of weather index (improved whether when pressure rises from 1,000 hPa, deteriorating weather when pressure drops from 1,000 hPa). C Current barometric pressure. D Current time.
To switch the color display screen On the barometer screen, swiping from right to left changes to the barometric pressure graph. Swiping the graph screen from left to right displays the barometer screen. Calibrating Barometric Pressure Readings Manually Though the pressure sensor built into the watch is adjusted at the factory, and normally does not require calibration, you can perform the calibration operation if you notice that readings are very different from those from other sources.
Using Altimeter Your watch displays relative altitude values based on air pressure readings taken by a built-in pressure sensor.
Monochrome Display ⑦ ⑧ ⑨ A Current altitude indicated by an arrow. The range of scale values shown will change in accordance with the current altitude. B Current altitude. C Current time. D High altitude over the past 24 hours. E Graph of altitude change over the past 24 hours (Horizontal Axis: Time; Vertical Axis: Altitude). The rightmost point indicates the current value. F Low altitude over the past 24 hours.
To switch the color display screen On the altimeter screen, swiping from right to left changes to the altitude graph. Swiping the graph screen from left to right displays the altimeter screen. Calibrating Altitude Readings Manually Frequent “Altitude Calibration” by manually inputting locally indicated altitude values is recommended in order to lessen the difference between altitude readings produced by this watch and those shown by local indications.
Before Using Altimeter You can configure the watch’s Altimeter to use smartphone position information (GPS) to correct altitude readings automatically. To use auto altitude correction, you need to first perform the following operation (Android smartphone only): Open “Settings”, tap “Location”, use the switch to turn “Location” on, and then choose “High Accuracy” mode. ● The altitude displayed by your watch is a relative value calculated based on barometric pressure.
Altimeter Precautions Do not use this watch while skydiving, hang gliding, paragliding, gyrocopter flying, glider flying, or engaged in other activities where altitude changes suddenly. ● Altitude readings produced by this watch are not intended for specialpurpose or industrial level use. ● In an aircraft, the watch measures the in-cabin pressurized air pressure, so readings will not match altitudes announced by the crew.
Displayed Altitude Values (Relative Altitude) The two ways to express altitude are described below. ① ② Sea level Relative Altitude: This is the difference in the altitudes between two locations. Example: Height measured from the ground to the top of a building (A) Sea Level Altitude (Elevation): Altitude measured from sea level.
Using Sunrise/sunset (When connected with an Android smartphone only) Shows the sunrise and sunset times and directions for your current location.
Monochrome Display ⑨ ⑩ A Sunrise time. B Nautical twilight start time before sunrise. C Sunset time. D Nautical twilight end time after sunset. E Current time. F Arrow indicating north. G Sunrise azimuth and time. H Sunset azimuth and time. I Alternates at 10-second intervals between sunrise time and sunset time. M is displayed for the sunrise time, while N is displayed for the sunset time. J Current time.
Before Using Sunrise/sunset This function uses smartphone location information. Be sure to perform the following operation: Open “Settings”, tap “Location”, use the switch to turn “Location” on, and then choose “High Accuracy” mode. Nautical Twilight Twilight is the time when the sky brightens as the sun is at or just below the horizon (water horizon or visible horizon). There are actually three types of twilight: nautical twilight, civil twilight, and astronomical twilight.
Using Tide Graph (When connected with an Android smartphone only) The Tide Graph screen shows tide information for a specific point (port). A Fishing Time screen indicates optimum fishing times based on the Moon age and Moon hour angle of your current location.
Monochrome Display ⑧ ⑨ A Shows the next high tide level and time for the 12-hour period starting from the current time. B Graphic indication of tide levels for the previous 12-hour period and the following 12-hour period starting from the current time (24 hours total). Orange characters shows current time and tide level. C Shows the next low tide level and time for the 12-hour period starting from the current time. D Shows the predicted optimum fishing time frame for the current date.
Before Using Tide Graph To use the Tide Graph screen, you need to use the CASIO MOMENT SETTER+ smartphone app (Android only) to specify the point (port) whose tide information you want to view. See “TOOL Button and TOOL App Settings” for details. ● The information the watch displays on the Fishing Time screen is calculated based on your current location. It is not affected by the watch’s point (port) setting.
Interpreting Fishing Time Screen Contents Fish Marks (Projected Probability of Fishing Success Indicators) The number of fish marks on the Fishing Time screen indicates the projected probability of fishing success. Anywhere from zero to four fish marks are displayed, and more fish marks indicate that better success can be expected. Note however, that this in no way specifically guarantees your fishing success. The fish mark indicator display is based on the current Moon age and Moon position (time angle).
Current Date’s Optimum Predicted Fishing Time Period The Fishing time Screen shows two orange time periods centered on hour angles 00:00 and 12:00, and two blue time periods centered on hour angles 06:00 and 18:00. Each region indicates periods during which optimum fishing can be expected. The orange region indicates the best fishing period as predicted by the watch, while the blue region indicates the next best fishing period.
Current Month’s Hour Angle and Moon Age Indications The location of the Moon indicator on the Fishing Time screen shows the current hour angle of the Moon, while the shape of the indicator shows the current Moon age. In the screen shown above, for example, the current Moon hour angle is 22:00 (12 o’clock position = hour angle 00:00, 6 o’clock position = hour angle 12:00), while the Moon age is 21.3 to 23.1. The table below shows how Moon age is indicated by the Fishing Time screen indicator.
Using My Graph (When connected with an Android smartphone only) My Graph shows a graphic representation of your activities on the current day. It shows the type of activity you performed and when you performed it.
Monochrome Display ⑤ ⑥ A Current time. B Circle graph showing the current status of four types of activities starting from midnight of the current day. C Shows current number of calories burned, starting from midnight of the current day (under default settings). You can also change settings to show number of steps or other information. See “TOOL Button and TOOL App Settings”. D Shows the amount of time spent engaged in each type of activity starting from midnight of the current day.
Before Using My Graph My Graph is disabled (B) under initial default watch settings. You must enable My Graph ( ) if you want to use it. For more accurate calories burned calculation, you should input physical profile information. Use the CASIO MOMENT SETTER+ smartphone app (Android only) to perform these operations. For more information, see “TOOL Button and TOOL App Settings”.
Interpreting Graph Screen Data Four concentric circles correspond to four activity types (rest, walking, running, riding). Engaging in one of the four activities causes a color coded arc to appear within the activity’s circle. ① ② ③ ④ A Time period running. B Time period walking. C Time period at rest. Includes the time when the watch is stationary while you are not wearing it. D Time period riding (bicycle, automobile, train, etc.) To hide the current time and activity times Tap the touch screen.
Using the APP Button Pressing the watch’s APP button starts up the app you assigned to it. You can use the steps below to change the app assigned to the APP button. 1. Hold down the power button for about two seconds to display a list of apps. Next, tap “APP Button”. ● This will display a list of apps that can be assigned to the APP button. 2. Scroll the list of apps upwards or downwards until the one you want is displayed, and then tap it.
Using the Activity App (When connected with an Android smartphone only) The Activity app is a CASIO Android Wear app. It measures the time you spend engaged in three different activities (mountain climbing/trekking, fishing, cycling). You can also use the CASIO MOMENT SETTER+ smartphone app (Android only) in combination with an activity to have the watch display useful information at just the right timing as you engage in an activity. For more information, see “Using MOMENT SETTER”.
Basic Activity App Operations To start up the Activity app Hold down the power button for about two seconds to display a list of apps. Next, tap “Activity”. To switch between activity types Start up the Activity app and display the START screen (no timing operation in progress). Swipe the touch screen left or right.
To change Activity app settings 1. While the Activity app is running, swipe the touch screen from right to left until the “Settings” screen is displayed. 2. Tap D. ● This displays a CASIO setting menu. 3. Tap the menu item for the setting you want to change. ● The table below describes the items displayed on the menu. For details, refer to the section indicated for each menu item.
To start activity timing 1. Display the START screen of the activity whose timing you want to start. 2. If you display the “Climbing, trekking” START screen, tap “GOAL”. On the screen that appears, input your target altitude and then tap “SET”. 3. To start timing, tap “START”. ● This displays the timing screen. Note ● After starting up the Activity app, the watch display will automatically dim after about 30 seconds of non-use. To wake up the watch, tap the touch screen or press the power button.
To stop activity timing 1. On the timing screen, swipe the touch screen from right to left. 2. Tap “STOP”. ● This stops measurement and returns to the START screen. Note ● The Activity app automatically shuts down when 20 hours elapse after a measurement is started. To exit the Activity app To stop an ongoing timing operation, return to the START screen, and then swipe the touch screen from left to right as many times as necessary to return to the Home Screen (the watch face screen).
Screen while Measurement is in Progress Climbing, trekking ① ② ③ ④ ⑤ A Difference in altitude between the current reading and the reading 60 minutes before. If the current measurement was started less than 60 minutes ago, this value shows an approximate 60-minute value calculated based on the current reading and the first reading. B Current time. C Input target altitude. D Difference between target altitude and current altitude. Rmng: Current altitude is less than target.
Fishing ① ② ③ ④ A An arrow indicates barometric pressure change between the current 10minute average and the previous 10-minute average. The arrow is not displayed when there is no change. The value shows the current barometric pressure. B Current time. C Graph of barometric pressure change over the past two hours. D Time elapsed from start of measurement.
Cycling ① ② ③ ④ A Current traveling speed. B Current time. C Cumulative distance traveled from start of measurement. D Time elapsed from start of measurement. Note ● Since speed and distance traveled are measured using the smartphone’s GPS function, location measurement error may result in measured value error. ● Speed and distance readings are calculated based on periodic measurements over fixed periods. They are not constant measurement.
Common CASIO App and CASIO Watch Face Settings A number of functions, such as Compass and Altimeter are common for both CASIO apps and CASIO watch faces. This section explains settings that are reflected both in CASIO apps and CASIO watch faces. Performing Compass Calibration (Magnetization Correction) You can start the magnetization correction operation manually while a CASIO watch face that supports compass display is being used. To start the magnetization correction operation 1.
Calibrating Barometric Pressure Readings Though the pressure sensor built into the watch is adjusted at the factory, and normally does not require correction, you can perform the correction operation below if you notice that readings are very different from those from other sources. You will need another accurate barometer to take current readings at your location, which you can input for correction. 1.
4. After the value is the way you want, swipe the touch screen from left to right to return to the setting menu. 5. To close the setting menu, swipe the touch screen from left to right. Note ● To reset the correction value and return to barometric pressure readings based on the pressure sensor measurements, go to the barometric pressure input screen and tap C.
Calibrating Altitude Readings There are two settings for calibrating altitude readings: “Altitude Calibration” and “Correct Altitude Using Location” (when connected to an Android smartphone only). Altitude Calibration Correct Altitude Using Location You can lessen error in the altitude readings displayed by the watch by manually inputting accurate local altitude and elevation values. You can find out the elevation at your current location from signs, maps, on the Internet, etc.
To perform altitude reading calibration manually 1. What you should do first depends on whether you are starting from a CASIO app or watch face that displays altitude. From a CASIO Watch Face: While the “Altitude”, “Authentic”, “Field”, “Multi”, or “Combination” watch face is displayed, hold your finger on the touch screen for about two seconds until the watch face compresses in size.
4. On the altitude input screen that appears, input the elevation at your current location (which you obtained from local indications). ● Tap the digit of the value that you want to change, and then tap or to change it. 5. After the value is the way you want, swipe the touch screen from left to right to return to the setting menu. 6. To close the setting menu, swipe the touch screen from left to right.
To reset the altitude calibration value 1. Perform steps 1 through 3 under “To perform altitude reading calibration manually”. 2. Tap C. ● Important! Using the above procedure to reset the correction value causes the watch to display altitude values that are simply calculated based on International Standard Atmosphere (ISA) definitions. Because of this, there will be large error between displayed values and actual altitude.
Changing the Monochrome Display Setting You can select how the watch’s monochrome LCD displays data. This setting is applied to all of the displays below. ● “2 Layers” monochrome CASIO Watch Face display ● All function monochrome displays of the TOOL app ● Timepiece Mode monochrome display To change the monochrome display setting 1. What you should do first depends on whether you are starting from the TOOL app or the “2 Layers” watch face.
Changing the Unit Setting You can change the measurement units used when a CASIO app and watch face displays altitude, distance, barometric pressure, and other values. This setting affects all CASIO apps and watch faces that display values in the applicable units. To change the unit setting 1. What you should do first depends on whether you are starting from a CASIO app or watch face.
Using the CASIO MOMENT SETTER+ App on a Smartphone (Android Only) ● Important! If you are using an Android smartphone, be sure to install CASIO MOMENT SETTER+ app in order to be able to use all of the functionality provided by this watch. Note ● This section describes watch and smartphone operations. X: Watch operation Y: Smartphone operation You can use the CASIO MOMENT SETTER+ app to perform the watch functions listed below from your smartphone.
Installing the CASIO MOMENT SETTER+ App on a Smartphone Y On your smartphone go to the Google Play Store, search for “CASIO MOMENT SETTER+” and then install it. ● Important! Starting up CASIO MOMENT SETTER+ immediately after installing it may cause the following error message to appear: “The watch is being setup.” This means that installation of the app on the smart watch system (which is triggered automatically when you install the CASIO MOMENT SETTER+ app on your smartphone) is in progress.
Watch Face Switching and Advanced Setting Configuration Use the procedures in this section to switch to any one of the original CASIO watch face designs and to configure watch face settings. To switch to another watch face 1. Y On your Android smartphone, start up CASIO MOMENT SETTER+ app and then tap “Watch faces”. 2. Y Use the left (<) and right (>) arrows on either side of the screen or swipe the touch screen left and right to scroll though the available watch faces, and display the one you want to use.
To change watch face settings 1. Y On your Android smartphone, start up CASIO MOMENT SETTER+ app and then tap “Watch faces”. 2. Y Use the left (<) and right (>) arrows on either side of the screen or swipe the touch screen left and right to scroll though the available watch faces, and display the one whose settings you want to change. 3. Y The settings you can change depend on the watch face. Tap a button at the bottom of the screen to display a setting screen.
TOOL Button and TOOL App Settings Use the procedure below to specify which tools are called up and their call up sequence when the TOOL button is pressed. You can also configure settings that control watch functions. 1. Y On your Android smartphone, start up CASIO MOMENT SETTER+ app and then tap “Buttons”. 2. Y Tap “TOOL Button” to display a list of TOOL app functions that can be assigned. ● For information about TOOL app functions, see “Using the TOOL App (TOOL Button)”. 3.
Function Compass Altimeter Tide Graph My Graph ● Setting item Description Compass settings Select to turn magnetic declination on or off. The compass indicates true north when on, and magnetic north when off. Altimeter settings Select to specify whether or not to correct altitude (elevation) using GPS information for your current location. Tide Graph point Select to specify the point (port) whose tide information you want to display.
APP Button Settings You can use the procedure below to specify the watch app that starts up when the APP button is pressed. 1. Y On your Android smartphone, start up CASIO MOMENT SETTER+ app and then tap “Buttons”. 2. Y Tap “APP Button” to display a list of installed watch apps. 3. Y Tap the app you want to assign to the APP button so its check box is selected ( ). 4. Y After you configure the settings you want, tap < on the left edge of the screen.
Registration Details The “Save daily activity records” setting must be enabled in order to use “My Graph”. Enabling “Save daily activity records” increases power consumption, so it is recommended that you disable it when not using My Graph. 1. Y In the upper left corner of the screen, tap . On the menu that appears, tap “Registration details”. 2. Y Tap the checkbox to the left of “Save daily activity records” to toggle it between enabled ( ) and disabled (B).
Using MOMENT SETTER MOMENT SETTER lets you configure the watch to display specific information in accordance with timing specified by you. MOMENT SETTER is designed mainly to be used while an Activity app measurement operation is in progress. For example, you can use MOMENT SETTER as described below. ● During a trekking Activity app operation. Three hours before sunset, the watch automatically displays the upcoming sunset time. ● During a fishing Activity app operation.
● Important! To receive alerts from the selected MOMENT SETTER items, a watch Activity app of the same category of the selected MOMENT SETTER items must be performing a measurement. However, in the case of MOMENT SETTER items included in the “Extras” category, alerts are issued when specified conditions are met, even if an Activity app operation is not in progress.
Practical Application 1: Using the “Climbing, trekking”: “Every 1000 steps, display "Take a break.".” MOMENT SETTER item 1. Y On your Android smartphone, start up CASIO MOMENT . SETTER+ app and then tap 2. Y Tap “Climbing, trekking”. 3. Y Scroll the menu downwards, and then tap the checkbox to the left of “Every 1000 steps, display "Take a break.".” to select it ( ). ● You can skip steps 4 and 5 if you do not need to change conditions. 4. Y On the right end of the same line, tap D. 5.
8. X Tap “START”. ● ● This starts measurement and displays the “Climbing, trekking” timing screen. A step count for mountain climbing or trekking is started from this point, so the message “Take a break.” (or another message you specified in step 5) will appear every 1,000 steps (or the number of steps you specified in step 5). 9. X Press the power button to return to the Home Screen (watch face screen).
Practical Application 2: Using the “Cycling”: “When stopped, display the distance travelled thus far.” MOMENT SETTER item 1. Y On your Android smartphone, start up CASIO MOMENT . SETTER+ app and then tap 2. Y Tap “Cycling”. 3. Y Scroll the menu downwards, and then tap the checkbox to the left of “When stopped, display the distance travelled thus far.” to select it ( ). 4. X On the watch, start up the Activity app. ● Hold down the power button for about two seconds to display a list of apps.
7. X Press the power button to return to the Home Screen (watch face screen). Leaving the Activity app timing screen on the display may cause you to miss MOMENT SETTER notifications. To avoid this, return the watch to the Home Screen at this time. ● To display the Activity app timing screen again, perform the steps below. ● 1. Swipe the touch screen from the bottom to top to display the Activity app card. 2. Swipe the card from right to left. On the screen that appears, tap I. 8.
Practical Application 3: Using the “Extras”: “When phone battery becomes 20 % or lower, display a low battery alert.” MOMENT SETTER item 1. Y On your Android smartphone, start up CASIO MOMENT . SETTER+ app and then tap 2. Y Tap “Extras”. 3. Y Tap “When phone battery becomes 20 % or lower, display a low battery alert.” to select it ( ). ● You can skip steps 4 and 5 if you do not need to change conditions. 4. Y On the right end of the same line, tap D. 5.
Using the Timepiece App Running the Timepiece app enters the Timepiece Mode and displays the current time on a monochrome screen. All other non-timekeeping watch functions are disabled. The Timepiece Mode consumes very little power, so you can use the watch for normal timekeeping while conserving battery power. Important! Android Wear functions are all disabled in the Timepiece Mode, so all watch apps and display of their notifications are disabled.
To enter the Timepiece Mode 1. Hold down the power button for about two seconds to display a list of apps. Next, tap “Timepiece”. ● This displays the Timepiece Mode confirmation screen. 2. Read the explanation on the screen, swiping from right to left as required to change pages. ● Note that the explanation consists of multiple pages. Swipe the touch screen from right to left until the “Settings” screen is displayed.
6. On the confirmation message that appears, tap ● . Shutting down Android Wear enters the Timepiece Mode and displays the current time on a monochrome screen. To illuminate the display in Timepiece Mode Press (and immediately release) the power button. This will illuminate the display for about two seconds. To exit the Timepiece Mode (starting up Android Wear) Hold down the power button for about two seconds.
Monochrome LCD Screen Your watch has a dual-layer color and monochrome LCD. Switching between monochrome and color LCD screens can be performed manually, but it is also performed automatically in certain cases. The following section explains when the watch displays the monochrome LCD screen. After entering the Timepiece Mode The watch will use the monochrome LCD screen to display the current time after you enter the Timepiece Mode by running the Timepiece app (see “Using the Timepiece App”).
While the “2 Layers” watch face is selected While the “2 Layers” watch face is selected (see “CASIO Watch Faces”), the monochrome LCD screen will display the current time after the watch is left idle for some time. Display Operations Tapping the touch screen while the monochrome LCD screen is shown will switch to the color LCD screen. ● The display will not switch to the monochrome LCD screen if a notification card is displayed on the color LCD screen.
While “Always-on screen” is OFF While OFF is selected for the “Always-on screen” setting on the Settings screen (see “Using the Settings”), the watch uses the monochrome LCD screen to display the current time after the watch is left idle under the conditions below.
When the charge level drops below 5% The watch will switch to current time display using the monochrome LCD screen whenever its charge level drops below 5%, regardless of the currently selected watch face type and display settings. Display Operations Tapping the touch screen while the monochrome LCD screen is shown will switch to the color LCD screen.
While the watch is in Doze mode The watch will display the current time using the monochrome LCD screen while in Doze mode (see “Doze Mode”). Display Operations Tapping the touch screen while the monochrome LCD screen is shown will switch to the color LCD screen. ● Even if a notification card is displayed on the color LCD screen, the display will switch to the monochrome LCD screen (which does not show the notification card).
While Android Wear operation is stopped due to a low charge level The watch displays the current time using the monochrome LCD screen for a while after Android Wear operation is stopped due to a low charge level. Display Operations Though this screen has the same appearance as the Timepiece Mode screen (see “Using the Timepiece App”), the power button is completely disabled in this case. ● The watch does not perform any notification operations.
Error Code and Error Message List If an error code or error message appears on your watch, look it up in the table below and take the required action. Error Code Error Message 1001, 1002, 1009 Normal charging is not possible for some reason. If this message keeps appearing, request servicing. 1003 Too hot to charge. 1004 Too cold to charge. 9000 Some problem occurred with the watch. Power will turn off shortly. 9001, 9002, 9003 Some problem occurred with the watch. Power will turn off shortly.
Restoring Watch Operation If you find that the watch will not operate normally, perform the steps below to restart the watch and then try the operation again. 1. Hold down the power button for about two seconds to display a list of apps. 2. Tap “Settings”n“Restart”. If the above operation does not work for some reason, perform the procedure below to force it to shut down. After the watch is forced to shut down, it will restart automatically. 1.
Precautions During Use Display Information Accuracy Tide Graph Precautions For Japan area oceans, tide times and level changes are predictively calculated using harmonic constant data obtained from Bibliography 742 Tidal Harmonic Constants Tables, Japanese Coast (February 1992) published by the Hydrographic Department of the Japan Coast Guard, and from the List of Tidal Stations (2015) published by the Japan Meteorological Agency.
Water Resistance This watch is water resistant up to five atmosphere, which means it can be worn while working around water and while swimming. However, note the information below. ● Even if a watch is water resistant, note the usage precautions described below. ー Avoid using this watch while windsurfing, skin diving, or scuba diving. ー Do not operate the buttons while your watch is submersed in water or wet. ー Do not charge the watch while it is in water or wet.
MIL-STD-810G This watch has been tested for the items described below in accordance with the MIL-STD-810G standard established by the U.S. Department of Defense. ● Shock resistance is based on the assumption of normal daily use. Throwing the watch, or subjecting it to excessive dropping or other extreme shock can cause it to break. ● Be sure to read the information in this manual under “Precautions During Use” and “User Maintenance” in order to ensure proper use of this watch.
Protective stickers ● Be sure to remove all protective stickers and/or paper tags that may be affixed to your watch (including its back cover) and/or its band when you purchase it. Using the watch without removing protective stickers and/or paper tags may result in the build-up of dirt between the watch/band and the sticker/paper tag, which creates the risk of rust and skin rash. Charging The watch and AC adaptor may become warm to the touch during charging.
Temperature Never leave your watch on the dashboard of a car, near a heater, or in any other location that is subject to very high temperatures. Do not leave your watch where it will be exposed to very low temperatures. Doing so can cause malfunction. ● Leaving your watch in an area hotter than +60°C (140°F) for long periods can lead to problems with its LCD. The LCD may become difficult to read at temperatures lower than 0°C (32°F) and greater than +40°C (104°F).
Resin Components Allowing your watch to remain in contact with other items or storing it together with other items for long periods while it is wet can cause color on resin components to transfer to the other items, or the color of the other items to transfer to the resin components of your watch. Be sure to dry off your watch thoroughly before storing it and make sure it is not in contact with other items.
Metal Components Failure to clean dirt from metal components can lead to formation of rust, even if components are stainless steel or plated. If metal components exposed to sweat or water, wipe thoroughly with a soft, absorbent cloth and then place the watch in a well-ventilated location to dry. ● Use a soft toothbrush or similar tool to scrub the metal with a weak solution of water and a mild neutral detergent, or with soapy water.
User Maintenance Caring for Your Watch Remember that you wear your watch next to your skin, just like a piece of clothing. To ensure your watch performs at the level for which it is designed, keep it clean by frequently wiping with a soft cloth to keep your watch and band free of dirt, sweat, water and other foreign matter. ● Whenever your watch is exposed to sea water or mud, rinse it off with clean fresh water. ● For a resin band, wash with water and then wipe dry with a soft cloth.
Premature Wear ● Leaving sweat or water on a resin band or bezel, or storing your watch in an area subject to high moisture can lead to premature wear, cuts, and breaks. Skin Irritation ● Individuals with sensitive skin or in poor physical condition may experience skin irritation when wearing a watch. Such individuals should keep their leather band or resin band particularly clean.
Main Specifications ● ● 1.32-inch dual layer display, Color TFT LCD (320 × 300 pixels) + Monochrome LCD Capacitive touch panel Sensors: Pressure sensor, Accelerometer, Gyrometer, Magnetic sensor Microphone ● Vibration ● ● ● Battery: Type: Lithium-ion battery Charging time: Approximately 2 hours at room temperature (Be sure to use the special charger cable and AC adaptor.) Operating time on full charge*1: Normal use: More than one day Timepiece: Approximately one month Bluetooth: Bluetooth® V4.
Environment performance: MIL-STD 810G (United States military standard issued by the U.S. Department of Defense) Operating temperature: 0°C to 40°C (32°F to 104°F) ● Colors: Black/Green/Red/Orange ● ● ● Watch: Auto time correction: By communication with smartphone (Time can be adjusted manually.
Altimeter: Measurement range: –700 to 10,000m (–2,300 to 32,800ft) Measurement unit: 1m (5ft) Measurement accuracy: within ±75m (within ±250ft) (When frequent manual calibration is performed) Shortest measurement interval: 1 minute Altitude graph: Past 24 hours Manual altitude correction, Auto altitude correction using location information*4 *5 Barometer: Measurement range: 260 to 1,100 hPa (7.6 to 32.5inHg) Measurement unit: 1 hPa (0.1inHg) Measurement accuracy: within ±3 hPa (within ±0.
● Charger (AC adaptor): AD-W50100U1 Power supply: INPUT: AC 100V to 240V 50Hz/60Hz OUTPUT: 5.0V/1.0A Power consumption: 160 mA AD-C54UG Power supply: INPUT: AC 100V to 240V 50Hz/60Hz OUTPUT: 5.0V/650mA Power consumption: 90 mA Charger cable: Length Approximately 0.75m (2.
● About MIL-STD 810G (United States military standard issued by the U.S. Department of Defense): Description: 1. Drop 2. Random Vibration 3. Humidity 4. Solar-Radiation 5. Non-Operating Altitude 6. Operating Altitude 7. Non-Operating High Temperature 8. Non-Operating Low Temperature 9. Temperature Shock 10. Icing Freezing Rain Procedure: MIL-STD-810G, w/change1 1: Method 516.7 ProcedureⅣ 2: Method 514.7 ProcedureⅠ 3: Method 507.6 ProcedureⅡ 4: Method 505.6 ProcedureⅡ 5: Method 500.
Phones & tablets that work with Android Wear*7 Android 4.3+ or iOS 8.2+*8. Supported features may vary between platforms. Visit g.co/wearcheck on your Android phone or iPhone® to see if it’s compatible. ● Size (Body H × W × D): Approx. 61.7 × 56.4 × 15.7mm (2.4” × 2.2” × 0.6”) ● Weight (including band): Approx. 93g (3.3oz) ● *1 *2 *3 *4 *5 *6 *7 *8 CASIO test conditions Snooze Feature Vibration alert only without alarm sound. iOS not supported.
Chargeable Battery Handling ● Important! Do not try to replace batteries by yourself. Request battery replacement from an authorized CASIO service center or your original retailer. Chargeable Battery Handling (Please recycle!) The built-in lithium-ion battery includes valuable resources. When you are ready to discard your watch, follow proper procedures in order to recycle resources.
Supplementary Information Open Source Information CASIO uses GPL, LGPL and other source code that comes under an open source license in this product. CASIO discloses the source code in accordance with each open source license. For source codes and details about each open source license, visit the CASIO website. Source code is provided “as-is” without any guarantees. However, this does not affect warranty conditions by CASIO concerning product defects (including defects in the source code).
Regulatory Information Your watch is a device that supports electronic way of display. To display regulatory information, perform the steps below. 1. Hold down the power button for about two seconds to display a list of apps. 2. Scroll the screen downwards and then tap in the following sequence: “Settings” n “About” n “Regulatory information”.
This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects.
CASIO COMPUTER CO., LTD.
