Instruction manual

79
au Media Tuner
Using Television
(1Seg)
While the standby screen is
displayed, hold down
g
for at least one second.
You need to perform an initialization
procedure before you can use au
Media Tuner. If you have not performed
initialization yet, refer to “Configuring au
Media Tuner Initial Settings” (page 77).
When you start up au Media Tuner after
configuring initial settings, the channel of
the mode you were viewing the last time
you used will appear.
Use
L
and
R
to change
the channel.
Use
j
in television operation screen
and
gf
in data operation screen to
adjust the volume.
With EZ Channel-Plus, you can select a
program with
s
and then press
c
(
再生
) (Play) to start playback.
◎
When you start up au Media Tuner, it may take some time to acquire
images and, especially in the case of a data broadcast, data. This is due
to the characteristics of digital broadcasts.
◎
In any mode, pressing
R
while the final channel is displayed or
L
while the first channel is displayed will switch mode.