Instruction manual

71
EZ News Flash/au one Gadget
Setting EZ News Flash service
You can use EZ News Flash with simple settings for no charge. Refer to
“Initializing E-mail and EZweb” (page 24), complete initializing, and then
make settings for EZ News Flash.
Press
u
in the standby
screen, select the ticker
and press
c
(OK).
Press
j
to select
“
はい
” (Yes), press
c
(
選択
)(Select), Press
j
to select “OK,” and
press
c
(Select).
Setup is complete.
When you complete setup and return to
the standby screen, the message “
次回配
信までしばらくお待ち下さい。
” (Please
wait a while for the next distribution), will
be displayed on the ticker.
■
Turning EZ News Flash off
To turn off EZ News Flash, operate the following directions:
a
While the standby screen is displayed, press
u
, select the ticker and
press
c
(News).
b
Press
%
(
メニュー
)(Menu), use
j
to select “
サービス設定解除
” (Service
termination), and press
c
(
選択
)(Select).
c
Follow the instructions on the screen and turn off the setting.
The setting is turned off, and news distribution will stop.
■
Changing settings of receiving notifications
You can change the settings of the tone, vibrator, and LED indicator which
notifies EZ News Flash distribution.
a
While the standby screen is displayed, press
c216
.
b
Set each item.
If you do not need notifications when receiving EZ News Flash, set the
item to “OFF.”