E Tr G Tablet V-T500 Series Serisi Serie English User’s Guide Kullanım Kılavuzu Bedienungsanleitung V-T500_ETG_Hyo1.indd 1 Bitte lesen Sie sorgfältig die in dieser Anleitung enthaltenen „Sicherheitsvorkehrungen“, bevor Sie Ihr Tablet zum ersten Mal verwenden. Nachdem Sie die Anleitung gelesen haben, bewahren Sie sie für späteres Nachschlagen gut auf. Einzelheiten zum Produkt finden Sie in der Bedienungsanleitung (PDF), die zusammen mit Ihrem tablet kam.
Google™, the Google logo, Android™ and the Android logo are trademarks or registered trademarks of Google, Inc. The Bluetooth wordmark and logo are registered trademarks of Bluetooth SIG, Inc. and are used by permission granted to Casio Computer as a certified logo user. SD, SDHC, microSD and microSDHC are trademarks of SD-3C, LLC. HDMI (High-Definition Multimedia Interface) and the HDMI logo are trademarks of HDMI Licensing, LLC. FeliCa is a registered trademark of Sony Corporation.
Contents Safety Precautions .........................................................................................E-2 Operating Precautions ...................................................................................E-9 Important ......................................................................................................E-12 Regulatory Information ................................................................................E-12 Tablet System Configuration .............................
Safety Precautions Congratulations upon your selection of this CASIO product. Be sure to read the following Safety Precautions before trying to use it for the first time. Your neglect or avoidance of the warning and caution statements in the subsequent pages causes the danger of fire, electric shock, malfunction and damage on the goods as well as personal injury. Markings and Symbols The following are the meanings of the markings and symbols used in these Safety Precautions.
Warning Dust and Moisture • Though the tablet is dust and water splash resistant, its options including the battery pack are not. Keep loose metal objects and containers filled with liquid away from your tablet and the options. Also, never handle the tablet and the options while your hands are wet. Warning Interference with the Operation of Other Equipment (Using Wireless Data Communication) 11 • Keep your tablet at least 22 centimeters (8 /16") away from anyone wearing a pacemaker.
Caution Location • Install the cradle properly on a flat and stable surface so that it cannot fall down onto floor. LCD Screen • Never apply strong pressure to the screen or subject it to strong impact. Doing so can crack the LCD Screen. Warning Avoiding Traffic Accidents • Never use the tablet while operating a motor vehicle. Park your vehicle in a safe place before performing any operation. • Never locate the tablet where it might interfere with proper operation of the vehicle.
Lithium Polymer Battery Pack Danger • Never use the tablet and its option including the battery pack and battery next to open flame, near a stove, or any other area exposed to high heat, or leave them for a long period of time in a vehicle parked in direct sunlight. • Never use the battery pack with any device other than the tablet. • Never dispose of the battery pack by incinerating it or otherwise expose it to heat.
Power Supply / AC Adaptor Warning • Do not use the tablet at a voltage other than the specified voltage. Also, do not connect the tablet to a multi-plug power strip. • Never modify, sharply bend, twist, or pull on the power cord. • Never use a detergent to clean AC adaptor and its power cable, especially on the plug and the jack. • When using the battery chargers and the cradles, be sure to use the respective AC adaptors. • Only use the power cord provided.
Alkaline Battery Handling Precautions (for the Digitizer Pen) Danger • Since there is the risk of blindness and other serious disorders when alkaline battery fluid enters the eyes, seek medical treatment immediately after adequately flushing the eyes with a large amount of tap water or other clean water without rubbing. Warning • Do not dispose of batteries in open flames or allow them to be heated, disassembled or modified.
Caution • Promptly remove worn out batteries from the device. Allowing worn out batteries to remain installed in the device for a long period of time results in the risk of the generation of gas from the batteries causing the batteries to leak fluid, overheat or rupture. • Remove the batteries from the device when not using for a long period of time. Failure to do so results in the risk of the generation of gas from the batteries causing the batteries to leak fluid and damage the device.
Operating Precautions Your tablet and its options are precision. Improper operation or rough handling can cause problems with data storage and other problems. Note and observe the following precautions to ensure proper operation. • Do not leave dead battery pack in the tablet for a long period. Dead battery pack can leak, leading to malfunction and damage to the tablet. • Stop or avoid using the tablet and its options in areas and conditions subject to the following.
• Take care not to trap objects such as magnetic cards, magnetic recording media or precision equipment between the V-T500 and the Ethernet Cradle, and do not bring such objects too close to the tablet and cradle. Bringing magnetic cards or other magnetic recording media too close could result in important data being erased due to the effects of magnetism. Precision equipment (wristwatches, etc.) should also not be placed close to the tablet or cradle as it could be damaged as a result.
— Avoid the battery pack with a full of the capacity to store for a long period of time. If you need to store it for a long period, be sure that the remaining capacity is 30 to 50 percent and to store in a moderate low temperature. This can reduce deterioration. — The battery pack gradually deteriorates over time. In particular, storing (or using) the fully charged battery pack at high temperatures tends to accelerate battery pack deterioration.
Important • This guide does not include any information about programming procedures. See the applicable separate documentation for information about the procedures. After Service • Should this product ever malfunction, contact your original retailer providing information about the product name, the date you purchased it, and details about the problem. This mark applies to EU countries and Turkey only.
Tablet System Configuration Bundled Items V-T500 Series Please check the items in the box before using the tablet for the first time. Tablet AC Adaptor AD-S36120A Battery Pack HA-M20BAT Power Cord User's Guide (this manual) AC-CORD-EU microSD Card Removal Tool Options Ethernet Cradle HA-M62IO The illustration shows the Ethernet Cradle (HA-M62IO).
Options Battery Pack Dual Battery Charger HA-M20BAT HA-M32DCHG AC Adaptor for V-T500/ Ethernet Cradle/ Cradle-type Battery Charger AC Adaptor for Dual Battery Charger AD-S90190C-N5 AD-S36120A-N Power Cord for Europe Power Cord for North America Power Cord for Taiwan Power Cord for Korea Power Cord for Australia AC-CORD-EU/AC-CORD2-EU AC-CORD-US/AC-CORD2-US AC-CORD-TW/AC-CORD2-TW AC-CORD-KR/AC-CORD2-KR AC-CORD-AU/AC-CORD2-AU Hand Belt Neck Strap HA-M95HB HA-M97ST Screen Cover HA-M98DC E-14 V-
General Guide Top 1 2 Left Front 5 6 7 Right 8 9 10 11 12 13 14 3 15 16 17 4 Bottom 18 Back 22 19 20 21 23 19 11 24 25 27 26 28 29 30 31 19 32 33 19 E-15 V-T500_ETG_E.
1 Power Button (→ E-22) 18 Communication Terminal 2 Volume Button 19 Mount for Hand Belt (→ E-39) or Strap (→ E-40) 3 mini HDMI Port (→ E-34) 20 Reset Switch (→ E-35) 4 SD Card Slot (→ E-31) 21 Rear Camera 5 Charge LED (→ E-20) 22 Mounting Holes for Screen Cover (→ E-41) 6 Notification LED 23 Mounting Holes for Pen Holder (→ E-36) 7 Light Sensor 24 Extension Port Automatically adjusts the display backlight brightness to suit the ambient brightness.
Loading and Removing the Battery Pack Your tablet uses two types of battery: a battery pack and a memory backup battery. The battery pack is used to power normal operations and to store data, while the memory backup battery provides the power required to maintain memory contents when the battery pack power is unable to supply power for some reason. Use the battery pack (HA-M20BAT) as the main power source. The backup battery is installed inside of the tablet.
Loading 1. Turn the tablet upside down. If the hand belt is fitted to the tablet, unclip it (see E-39). 2. Slide the left and right lock switches for the battery pack cover to the “FREE” position, and then remove the battery pack cover. 3. Load the battery pack with the printed side of the label facing upwards, fitting the lugs on the battery pack into the slots in the tablet so that the terminals in the battery socket and tablet are aligned. Terminals 4.
Removing 1. Make sure that the power on the tablet has been switched off. If the power is still on, hold down the power button to switch off (see E-22). 2. Turn the tablet upside down. If the hand belt is fitted to the tablet, unclip it (see E-39). 3. Slide the left and right lock switches for the battery pack cover to the “FREE” position, and then remove the battery pack cover. 4.
Charging the Battery Pack Battery pack installed in the tablet can be charged using either cradle, battery charger or AC adaptor. Battery charge condition can be monitored with charge LED on the tablet. Multiple battery packs can also be charged simultaneously using Dual Battery Charger. Ethernet Cradle/Cradle-type Battery Charger Align the mount holes in the tablet with the mount hooks on the cradle and fit the tablet into the cradle.
Dual Battery Charger Push the battery pack in until the mount hooks on the charger engage the mount lugs on the battery. Lug Hook With the engraved side upwards, push the connector firmly into the jack until it clicks into place. You can connect up to three Dual Battery Chargers. See E-45 for the connection method.
Switching On/Off and Sleep Switching On 1. Hold down the power button until the notification LED lights green (approx. 1 sec.). • The startup screen appears. • The screen shown differs depending on the device settings. • If the tablet is left unused for a set time while switched on, it automatically switches to sleep mode.
Initial Settings Unlocking the Screen 1. Touch [ ] in the startup screen and drag it to [ unlock the screen. ] that appears on the right to At shipment, the default menu shown below appears. Make a selection based on the operation you actually want to perform. Job Menu Android standard Tick this box to always apply the above setting when you press Home. E-23 V-T500_ETG_E_02.
Customization for Job Menu Use To access Job Menu, you must first customize the tablet as follows: 1. Build the menu to suit the operation. 2. Specify “None” as the security level for the Settings screen. E-24 V-T500_ETG_E_02.
Using microSD Cards This tablet supports microSD cards. The card slot is located in the battery pack compartment (see E-15, 16). Remove the battery pack before inserting or removing a card. Refer to pages 17 to 19 for information on “Loading and Removing the Battery Pack”. Install (or remove) a card according to the procedure described below. Installing 1. Make sure that the power on the tablet has been switched off. If the power is still on, hold down the power button to switch off (see E-22). 2.
3. Press on the card slightly ( The card is pushed out ( ). ). • If you have difficulty removing the card, use the microSD card removal tool provided. As shown in the illustration, hook the end of the tool under the projection on the card to pull the card out. 4. Pull out the card and load the battery pack. Important! • A card must be inserted with the top and bottom properly aligned and in the proper direction.
Using SAM Cards This tablet supports SAM cards. The card slot is located in the battery pack compartment (see E-15, 16). Remove the battery pack before inserting or removing a card. Refer to pages 17 to 19 for information on “Loading and Removing the Battery Pack”. Install (or remove) a card according to the procedure described below. Installing 1. Make sure that the power on the tablet has been switched off. If the power is still on, hold down the power button to switch off (see E-22). 2.
Removing 1. Make sure that the power on the tablet has been switched off. If the power is still on, hold down the power button to switch off (see E-22). 2. Remove the battery pack. 3.Gently push the card in above the supporting cover ( The card is pushed out ( ). ). 4. Pull the card out and close the supporting cover. 5. Load the battery pack. Important! • A card must be inserted with the top and bottom properly aligned and in the proper direction.
Using SIM Cards This tablet supports SIM cards. SIM cards may not be supported by some models. See E-16 for information on compatible models. The card slot is located in the battery pack compartment (see E-15, 16). Remove the battery pack before inserting or removing a card. Refer to pages 17 to 19 for information on “Loading and Removing the Battery Pack”. Install (or remove) a card according to the procedure described below. Installing 1. Make sure that the power on the tablet has been switched off.
Removing 1. Make sure that the power on the tablet has been switched off. If the power is still on, hold down the power button to switch off (see E-22). 2. Remove the battery pack. 3.Gently push the card in above the supporting cover ( The card is pushed out ( ). ). 4. Pull the card out and close the supporting cover. 5. Load the battery pack. Important! • A card must be inserted with the top and bottom properly aligned and in the proper direction.
Handling SD Memory Cards SD memory card can be installed in the SD memory card slot on the tablet. Install (or remove) an SD memory card according to the procedure described below. Installing 1. Open the cover of the SD memory card slot on the left side of the tablet ( ) and insert an SD memory card all the way in until the top of the SD memory card aligns with the entrance of the slot of the tablet ( ). 2. Close the cover of the SD memory card slot.
Handling the NFC Reader/Writer NFC is a type of RFID (Radio Frequency Identification) technology that allows the data in a device to be read simply by holding the device up to an NFC reader. It can be used to read RFID tags used for controlling goods as well as contactless IC cards used in applications such as employee identification. RFID tags and contactless IC cards can be read from either the front or the back of the tablet. Contactless IC Cards 1.
Important! Both contactless IC cards and RFID tags • The NFC employs a low power radio wave which does not require regulatory station license. • Frequency band used by the NFC is 13.56 MHz. Secure a sufficient space between V-T500 and other reader/writer located in the vicinity. Make sure also that a radio station employs the same frequency band does not locate near by prior to using V-T500.
HDMI Connection HDMI-compatible external devices can be connected to the tablet using a third-party HDMI cable. 1. Make sure that the power on the tablet has been switched off. If the power is still on, hold down the power button to switch off (see E-22). 2. Open the mini HDMI port cover on the left side of the tablet and connect the external device using a third-party HDMI cable. HDMI mini-connector Important! • Always turn the tablet off when connecting or disconnecting the cable.
Resetting the Tablet Resetting the tablet is the same as resetting a PC. Performing a reset causes all unsaved RAM data to be lost that are in mid-course of inputting and editing, but data and settings that are already stored in the FlashROM should be unaffected. Perform a reset to restore normal operation whenever the tablet operates abnormally due to misoperation or some other reason.
Using the Digitizer Pen You can use the optional Digitizer Pen to work on the tablet's touch-panel. General Guide Quick Button 1* Pen Tip Quick Button 2* Strap Hole Cap * The functions of quick buttons 1 and 2 differ depending on the application specifications. Bundled Items AAAA Battery Strap Pen Holder Secured to the mount on the upper rear of the tablet (see E-15, 16) using screws. Cannot be attached at the same time as the screen cover (see E-41). Attach to the strap hole on the pen.
2. Insert the battery with the positive (+) terminal towards the tip of the pen. 3. Turn the cap clockwise to secure. Using the Digitizer Pen Tap: Lightly touch the tip of the pen against the touch-panel. Sketching characters and lines: Sketch characters and lines by holding the tip of the pen against the touch-panel and sliding it lightly over the surface. E-37 V-T500_ETG_E.
Important! • Do not tap the Digitizer Pen too strongly against the touch-panel. • Pens other than the dedicated Digitizer Pen cannot be used. Replacing the Pen Tip The tip of the pen will wear out over time. Replace the tip as follows. 1. Grasp the tip of the pen and pull it gently out from the end of the pen. 2. Insert the new pen tip. E-38 V-T500_ETG_E.
Handling the Hand Belt The optional hand belt can be attached to the tablet. If you also plan to attach the neck strap, attach the neck strap first (see E-40). Attaching 1. Feed the ends of the 4 hand belt straps through the mounts on each corner of the back of the tablet. Then fold the straps back over, adjust the length as appropriate and fasten them in place using the Velcro fasteners. Important! • Pulling on the hand belt with excessive force could cause damage.
Attaching the Neck Strap The optional neck strap can be used to prevent the tablet from fall when carrying it around. Four strap mounts are provided. Use whichever 2 mounts provide greatest ease of use. If you also plan to attach the hand belt (see E-39), attach the neck strap first. Attach the neck strap according to the procedure described below. 1. Press the neck strap release buttons and pull apart the buckles on each end of the strap. 2.
Using the Screen Cover An optional screen cover can be fitted to the tablet to protect the display. The screen cover can also be used as a stand when using the tablet. If the pen holder for the Digitizer Pen is fitted to the tablet (see E-36), remove it. The Digitizer Pen can be kept in the screen cover's pen holder. Attaching the Screen Cover 1. Fasten the screen cover to the mount holes on upper rear of the tablet (see E-15, 16) using the 2 screws fitted to the screen cover. 2.
Using the Screen Cover as a Stand 1. Disengage the rubber bands from the tablet, open the cover and place it on a desktop or other flat surface. 2. Turn the tablet so that it faces forwards and fit the bottom into the notch in the cover to fix it in place. Notch Important! • The screws cannot be removed from the screen cover. • The screen cover is a synthetic leather product, so any moisture on the cover should be immediately be wiped off gently with a soft, dry cloth.
Ethernet Cradle (HA-M62IO), Cradle-type Battery Charger (HA-M30CHG) General Guide Top Front Right 2 3 1 Back (HA-M62IO) 7 4 Back (HA-M30CHG) 8 4 5 6 9 10 Communication/Power Supply Terminal 1 (HA-M62IO) Power Supply Terminal (HA-M30CHG) 4 AC Adaptor Jack 8 5 Selector Switch LAN Connection Status LED 2 Power Indicator LED 6 LAN Port 9 USB Host Port 3 Power Switch LAN Communication 7 Status LED 10 USB Client Port E-43 V-T500_ETG_E.
Dual Battery Charger (HA-M32DCHG) General Guide Front Top 2 3 1 Bottom Back 1 4 5 Bundled Items Connecting Bracket 2 Connecting Screws 1 Dual Battery Charger Connection Port 2 Charge Indicator LED 3 Power Supply Terminal 4 AC Adaptor Jack 5 Connecting Bracket Attachment Holes E-44 V-T500_ETG_E.
Connecting Multiple Dual Battery Chargers 1. As shown in the illustrations below, remove the connector covers of the Dual Battery Chargers you want to connect to each other. Connector cover 2. Connect the two Dual Battery Chargers as shown below. 3. Turn over the connected Dual Battery Chargers and attach a connecting bracket, securing it in place with screws. You can repeat the above steps to connect up to 3 Dual Battery Chargers. E-45 V-T500_ETG_E.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan PN410476-004 V-T500_ETG_E.indb 2 PN410476-004 MO1304-A Printed in China 2012 CASIO COMPUTER CO., LTD.
