Hardware manual

30
Recharge/Power Supply
Method Hybrid method of contact and
contactless type.
Contactless Method: Inductive coupling type
Contact Zone Output voltage: DC12V ±5%
Output Current: DC12V 2.0A.
Recharge Method Constant Voltage with Current Limiter By built-in recharge circuitry
Recharge Time Approx. 6 hours By built-in recharge circuitry
The figure seen from the top.
1 2 3 4 5 6 7 8
Figure 2.3 Pin layout
Table 2.6 Pin assignment table
Pin
No.
Name Function Direction Remarks
1 GND GND -
2 USB_ID To switch USB to Host or Client. OUT Output from Cradle
3 V CRADLE Recharge/Power Supply to The Terminal. -
4 D+ USB D+ IN/OUT
5 D- USB D- IN/OUT
6 V CRADLE Recharge/Power Supply to The Terminal. -
7 NONE
8 GND GND -
Dimensions and Weight
Table 2.7
Item Specification Remarks
Dimensions Approx. 292(W) × 98.5(D) × 64(H) mm
Weight (g) Approx. 332 g