Hardware manual

25
Item Specifications Remarks
SAM
Standard ISO 7816 IC Card Standard
General Specification SAM card of 1.8V/3V/5V are supported.
SD Card Slot Supporting SDHC/SDIO cards
microSD Card Slot Supporting SDHC card
Extension Port
USB
Connector Type A
Connector Type miniB
Host Transfer Rate Full speed (12Mbps)
Low speed (1.5Mbps)
High speed (480Mbps)
Bus Power Output 5V/500mA Max
Client Transfer Rate Full speed (12Mbps)
High speed (480Mbps)
Cradle Pin
Pin Layout Refer to Figure 2.1.
Pin Assignment Refer to Table 2.2.
Camera
Effective Pixels Approx. 5M Pixels (2592×1944 pixels)
Image Sensor 1/4.0 type, CMOS Image Sensor
Aperture F2.8 ±5%
Focal Length f = 3.4mm ±5%
Focus Distance 10cm to infinity
LED Light 29.4072 Candela/Square meter At steady lighting
Speaker Alarm, etc.
Microphone Voice input
Buzzer Voice output
Magnetic Sensor Available
Oparation mode switch See Figure 2.2, Table 2.3
Continue