User Manual

Connecting the Camera with a Smartphone

(Wireless Connection)

Procedure

Wireless Mode * Wireless settings * WLAN password

Use procedure to change the password you used when establishing a wireless LAN

connection between the camera and a smartphone.

IMPORTANT!

• Before changing the wireless LAN password, unpair the camera from its paired

smartphone (page 76).

1. Touch the password digit you want to change.

2. Touch “ ” or “ ” to change the currently selected digit.

3. When the password is the way you want, touch “OK”.

NOTE

• Changing the wireless LAN password will terminate the connection with the

smartphone. To reconnect with the smartphone, configure wireless connection

settings (page 63). If your smartphone does not support Bluetooth low energy

technology, perform the operations below to change your smartphone’s Wi-Fi

settings.

– iPhone:

Tap the right arrow of the field where the SSID of the camera is displayed in the

Wi-Fi settings to delete network settings. After deleting, select the camera SSID

again and input the new password.

– Android terminal:

Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and

select Forget. Select the camera SSID again and input the new password.

Changing the Camera Password for Wireless LAN Connection

(WLAN password)