User Manual

Connecting the Camera with a Smartphone

(Wireless Connection)

NOTE

• After the camera is paired, Bluetooth wireless technology operation will consume

battery power even when the camera it turned off. Because of this, it is

recommended that you charge the camera’s battery before you plan to use it.

. Smartphone that does not support Bluetooth low energy

technology

Configure smartphone wireless LAN connection settings (input the camera SSID and

password).

1. Touch “Wireless Mode”.

2. Touch “Shoot with phone”.

3. Touch “Start”.

This will enable connection with a smartphone and the

camera will display a screen for input of an SSID and

password.

4. For the smartphone Wi-Fi setting, input the

camera SSID and Password.

When the message “Start up the phone app.” appears on the camera’s monitor

screen, it means that the smartphone has established a wireless connection with

the camera.

• What you need to do to establish a wireless LAN connection depends on the

type of smartphone you are using. For details about how to establish a wireless

LAN connection see the user documentation that comes with your smartphone.

. What to do if you are unable to establish a wireless LAN connection

between the camera and a smartphone.

This problem may be caused when the smartphone is already wirelessly connected to

one of the networks or devices below. Go to your smartphone’s Wi-Fi settings and

select this camera’s SSID.

– Household wireless LAN

– Public wireless LAN

– Portable wireless LAN device

SSID

Password