User Manual

121
Appendix
The subject is out of
focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The LED light does
not light.
If the battery is dead, charge it (page 15).
Camera powers
down during Self-
timer countdown.
The battery may be dead. Charge the battery (page 15).
There is digital
noise in images.
Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a light
or some other means to illuminate the subject.
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows , charge the
battery as soon as possible (page 15).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Shots in dark
locations come out
bad.
Use the LED light.
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 102).
I can’t change the
settings of menu
items. Menu items
for some settings
are not displayed on
the menu.
Some menu items may not be available, depending on the
recording mode in use.
Problem Possible Cause and Recommended Action