GUIDELINES LAID DOWN BY FCC RULES FOR USE OF RHINITIS THE U.S.A. (not applicable to other areas). NOTICE This equipment has bean tasted and found to comply with the limits for a Class B dial devices, pursuant to Par 15 of the FCC Rules, Chase limits are designed 1o provide reasonable protection against harmful interference ina residential installation.
CONTENTS MANUAL CONVENTIONS.. BEFORE USING YOUR SF-A Gene rat precautions About POWER SUPPLY e Eatery Precautions Symptoms of low battery condition T replace tho batteries . GETTING STARTED General Guide . "o sl power select a Mode “To adjust the display contrast Using tie built-in timepiece .. To display the Home Time and the World Time City code table .. Set ring your Home Time . To set door Home Tome city, the current tire, and the current date switch between 12-hour and 24-hour format .
MO oo “To input Memo data. To recall Memo data Using the Secret Memory Area To register a new password . a4 “Fo eater the secret Memory area. . 45 To change the password i Checking the memory S44LUS . MEMORY FULL! message Facilitating an penitent transmissions &7 Deleting an O oarsmen 48 CALCULATOR FUNCTION 48 To enter the Calculator Mode .48 About the Calculator Mode keys. .48 To perform calculations . 30 To perform constant calculations. .
BEFORE USING YOUR SF-A Be sure o read this section first! 1t contains important information on precautions, power supply, and symptoms of low battery condition. Read this first! You must be familiar with the following information in order t use the nit correctly. It effs you what to do in erred o avoid losing important data stored in memory.
Before Using Your SE-A About the power suppl: About the power suppl » Over ary to recharge the batteries PPl supplied with the unit. The unit is powered by rwo CR2032 lithium batteries. Battery Precautions » Do not expose batteries to director heat, let them become shorted, incorrectly icing batteries Can cause them to burst or leak, possibly * or try 1o take them-apart; damaging the interior of the unit. Note the following precautions.
Before Using Your SF-AT + Be sure that you keep a separate copy of all important data that you store in the anti. To replace the batteries 1. Loosen the screw on the back of the writ that holds the battery compartment cover in place, and remove the cover hy siding it to the direction indicated by the arrow. w2 . Loosen the screw that secures one of the two battery holders in place and remove the battery holder, Caution I+ Be sure to remove only une battery at a time.
GETTING STARTED General Guide The following illustration shows the sames of the main consuls of the SF-A. OFF Koy ON MENU Key Display L Cursor Keys Ta switch power on an doff Press ON to switch on the unit. Press OFF o switch it off. If you do not perform any key operation for about & minutes, the unit automatically switches power off, To restore power, press ON. 12 General Guide Te select a Mode L. Press MEN « This canes the mode menu (© appear on the display.
Getting Started Using the built-in timepiece A built-in timepiece shows you the current date, time, and day of the week in your hometown (Home Time) and in any of 29 time zones around the ward (World Time). You can also select between hour and 24-hour timekeeping aural, aod between stands and daylight saving time. To display the Home Time and the World Time 1. Press MENU and then to display the Home Time. 2. Press EXE to switch the display between Home Time and World Time.
Getting Started, Setting your Home Time Use the procedures presented below 1o set your Home Tums City. a8 well as the current time and date. Unimportant! Be sure 10§ sour Home Time City first, Setting the date and time, . and then setting the Home Time CHy causes the Hume aid Jute & change. IF you want to change your Horne Time City and keep the same time and date. you must feasts everything in the following procedure from step 3 to the end. .
Getting Started « Use the following if yon want to specify noon or midnight. Noon Midnight 12-heir format: 1Z2PM 12 AM 24-hour format: 12 00 To switch between 12-hour and 24-hour format 1. Display the Home Time serene. 2. Hold down EDIT until the seconds begin to flash. 3. Press 12/24 to switch between the 12-hour and 24-hour formats. 4. Press EDIT to complete the procedure. To switch the Home Time between standard time and daylight saving time 1. Display the Home Time screen. 2.
22 DATA STORAGE You can store data in the Telephone Directory, Schedule Keeper, Reminder, and Memo Modes. Stored data can be recalled and edited as needed. You can even register password to keep your data private. Inputting Data This section describes flow to input text. The unit lets you input upper case alpha-characters, numbers, spaces, and 15 different symbols. Text can be input in the Telephone Directory, Schedule Keeper, Reminder, and Mesa Modes.
24 Data Storage « Be sure to include leading zeros when necessary. This means that you should nse specify April 3. « If you input illegal date or dime data like 13 for the month, 25 for the hour, the cursor automatically moves to the illegal entry when you press EXE to store the data, When this happens, angelic the entry and try storing it again. Telephone Directory, Telephone Directory The Telephone Dedicatory lets you store telephone directory data including names, telephonic numbers, and fax slumbers.
Dada Storage 2. Tutankhamen: : » You should input the last name first, since the data is sorted according to the name. 3. Press EXE. . « The NUMBER? prompt appears in line 1, and the cursor moves to line 2 for input of the telephone amber. At this tme, the anti autocratically changes to the Number Input Mode. (e UMBER? TEL 4. Input the telephone number. 5. Press EXE, « The FAX? prompt appears in line 1, and the cursor moves 1o fine 3 for input of the fax number. 6. Input the fax number. 7. Press EXE.
1f more than one item matches, SEARCH W recalls the first item. while SEARCH A recalls the last item. Nantes » The message NOT FOUND! appears when no dat scratches your specification, » The message. NO RECORD} appears when there is no data stored in memory. How the unit sorts Telephone Directory data The unit automatically sorts data recording o the texting the first fine, The following sequence issued. apace 2. Punctuation and symbols 3 Numbers 4.
Data Storage Tf there is an appointment scheduled for the current date (the date shewn in the Home Time Display), the data for that appointment is shown on the display when you enter the Schedule Keeper. In this case, press CLEAR to display the SCHEDULE? profuse. 2. Input the name of the appointment (*SALES MEETING™). G SHAKES MEETING. G ey 3. Press EXE. « The DATE TIME? prompt appears in fine 1, and the cursor moves 1o ling 2 for input of the date and time of the appointment.
Data Storage TForecalldatawith sequential search 1. Enter the Schedule Keeper Mode. 2. Press SEARCH A or SEARCH V. » Pressing SEARCH V7 scrolls forward through the totems, while SEARCH.A serous bag, To recall data using initial character sear cit 1. Enter the Schedule Keeper Mode. 2. Enter the first fow letters of the appointment name for the iem you want. « You can input up to 16 characters for initial character search. 3. Press SEARCH A or SEARCH W to start the search.
Data Storage Reminder Mode The tit provides a total of font Reminder types halt you van use to set up annual, monthly, weekly, and daily reminders. Alarms beep to make sure you never forget an important event, You can also store confidential data in a secret memory area (page 44). IMPORTANT! Use the procedure described om pig 20 to switch the Reminder Alarm on and off, Note that Reminder Alarms can be ethos all on ot all off. You cannot switch them on and off individually.
Data Storage 3. Presser. o The MONTH DAY? prompt appears in fine 2, and iic cursor moves 1o line 3 for input of the month and day of the reminder #ANNIVERSARY# ‘& MONTH-DRY? input the month and day {6 415), and then press EXE. v The ALARM TIME? uncompromising line 2, and the cursor moves to the right for input of the alarm Gme. ANNIVERSARY ¢ .& ALARM TIME 4/15. Tnpk the alarm time (100 0) for the reminder, and then press EXE.
Data Storage « After you press EXE, the ALARM TIME? Prompt appears in tine 2. and the cursor moves to the right fot input of the alarm time. WEEKLY'S 5, Input the alas time (09 0 6) for the reminder, and Thea press EXE. « 'The data is stored and the prompt QUEERLY? appears again asking for input of the nexus Weekly Reminder. Note ~ « If you want to store the Reminder without an alarm time, press EXE in stop § without inputting a tme.
Du ta Sta rage Reminder Mode To recall data using initial character search 3. Enter the date required for the Reminder type whose data you are searching 1. Enter the Reminder mode and specify the Reminder type whose s e data you want (e search through. anniversary: lout the month and day. 3. Enter the first few letters of the Reminder description name for Monthly: Input the day. \he tine you wan, { Weekly: Input the day of the week (L:SUN, Z:MON, « You caq input up 1o 16 characters for initial character sea
Data Storage Memo The Memo lets you store unformulated notes and memos. You can input up t0 48 characters (3 Tines of 16 characters each) for each memo. Characters can include alpha-characiers, numbers, and symbols. Luisa VALID THRU 12/96 @By To input Memo data Example: To create s memo item about 4 Visa credit card, number valid through December 1996, 1. Press MENU and then 7 (o enter the Memo Mode. » The MEMO? prompt appears on the display. 2. Input the data for the memo.
Data Storage Using the Secret Memory Area You can register a password and create a secret memory area for storage of Telephone Directory, Schedule Keeper, Reminder, and Memo data. Only one sword can be registered at one time, and it ix-used access all modes. . After you register a password, memory is divided into two areas. The open memory area contains data that anyone can view, without inputting password. Data stored in the secret memory area can b vowed only after inputting, 3 password.
Dais Storage Taichung the password 1. Enter the secret memory are. 2. PRESS MENU. 3. Professed. » The cu stent password appears with the cursor located under the first fetter. 4. Input the new password. S, Press EXE to register the new password. Checking the memory status While in the Telephone Directory, Schedule Keeper, Reminder,or Memo mode, hold down the CAPS key. Doing so displays a serene that shows the amount of memory used and the remaining memory.
CALCULATOR FUNCTION Whenever you enter the Calculator Mode, some of the keys on the BF-A keyboard take on calculator functions. Yo enter the Calculator Mode Press MENU and then 8 10-enter the Calculator Mode: About the Calculator Mode keys... The following illustration shows the unit keys that are used in the Calculator Mode. @ 60 ) OO O . the calculator completely {except the calculator « Use € to clear a value if you have not yet entered the operator Following that value. * CLEAR — clears the calculator.
Calculator Function To perform calculations o 53 +128 63 113, 963 1779, (564380} 52+ 68 563 ¥ { {Ei6si=] 78.19230762 123486 x 741852 = 12845674 1662(=] | E 9.168608051 .158608051 8660254035 35, 88, 101 1.4 2= ~38 27.6 45 54, v8(F) sl 4.6575 8= | K 8125 2% ot 1500 180 Parentage of 660 against 850 75. 15% adds-on of 2500 2875. 25% discount of 3500 2625, What wil e sling price 300 840.
Calculator Function About calculation errors... Whenever an error ices, the indicator “E" appears on the display. The following conditions afl result i errors. o When the number of digits in the mantissa of an intermediate or @ final result exceeds 10 digits. o When the bomber of digits in the mantissa of s value stored in memory exceeds 10 digits. In this case, the SF-A automatically retains the East value stored that did not exceed 10 digits. « Division by zero.
Resetting the SF-AT 2. Press EXE 0 reset the memory and delete all data or any other key to abort the reset operation without deleting anything., Following the reset operation described above, the Home Time display appears and the unit settings are initialized as noted below.
