Specifications

— 25 —

The following message will be dis-

played while writing the data to RAM.

When there is no RAM to write a data,

the following message will be dis-

played.

EXECUTING !

NO RAM

DATA ERROR !

ADDRESS CORR RAM

XXXX XX XX

COMPLETE !

64KB

3. ROM/RAM check

1) RAM write

2) RAM read

Error end display is;

Normal end display is;

MEMORY 1 WRITE

2 READ

3 DUMP

4 CHKSUM

INT #1 5 RTC

DISP CHNG key :Return to menu

TEL key :Write the set pattern to the selected RAM

area

Business card key :Compare the pattern displayed after # with

the write data of RAM and displays the

results.

MEMO key :Dump contents of memory. (direction

depens on setting of internal/extarnal

switch)

SCHEDULE key :Call up checksum and XOR values for

connected ROM/RAM data.

CALENDAR key :Bring up clock display. The present time,

data and daily alarm can be set.

INT---Internal RAM

EXT--External RAM(RAM card)

#1---Test data pattern(00,01,02...)

#2---Test data pattern(FF,FE,FD....)

NOTE 1. To change the RAM internal or extenal, press WORLD TIME key. As SF-8350 has no RAM

card interface, Test only Internal RAM area.

NOTE 2. To change the test data pattern,

press HOME TIME key for data pattern 1 (00,01,02,03,......FF,00,01,02,03,......).

press WORLD TIME key for data pattern 2 (FF,FE,FD,......00,FF,FE,FD,...........).

To release this message, press DISP CHNG key.