Specifications

— 9 —
7. TO SAVE THE DATA TO OTHER MACHINE
SF-5600AR can transfer customers data to other SF-5600AR with memory protection only when
replacing the LCD or the outer case.
How to transfer the data
* Before connecting the cable (SB-60 or SB-62), be sure to reset the slave machine to clear all
data.
1) Turn off the power switch and connect the two units using the cable (SB-60 or SB-62) as shown in
the drawing.
To change the hardware
parameters, press the
, , and
cursol keys.
4) Check the hardware parameters, and if the units have another condition, reset as follows.
TEL
To set the hardware
parameters, press the SET
key.
SET UP
PARITY NONE
BIT LENGTH 7
BPS 9600
ON
CAL
2) Turn on the power switch of each machine.
3) The slave machine must be set the date of Feb. 3rd, 1901 into the memory under the calculator
mode.
Operation: 1 9 0 1 DATE 2 DATE 3 DATE M+
If you don't set the date, the "PASSWORD" isn't transferred to the slave machine.
CLEAR
FUNCTION FUNCTION 4 3