Specifications

— 14 —
7. ERROR MESSAGES
■ Data Error Message
The data error message appears whenever the Digital Diary’s internal check discovers a problem with
data stored in memory.
Appearance of the data error message indicates that you must perform the all-reset procedure to
correct the problem. Start out with the procedure under “To start the all-reset operation” on page 6,
and continue with the procedure under “When to press for “Yes” on page 6”.
Important!
• Even though you are not using the unit for the first time, you must press (for “Yes”) when the unit
asks “ ( )” in order to reset
the unit after a data error occurs.
If you still have trouble after trying the operation, you may have a hardware problem.
■ Message Table
Action
Change specification or cancel
search.
Delete unnecessary data items
from memory.
Set a different alarm time or
change the existing alarm time.
Set a different alarm time.
Cancel the operation and try
again.
Message
.
(NOT FOUND!
PRESS TO QUIT.)
,
.
(MEMORY FULL, PRESS
ANY KEY.)
(ALARM TIME COINCIDENT!)
(ALARM TIME ALREADY
PASSED!)
.
(DATA COMM. ERROR,
PRESS ANY KEY)
Meaning
Data specified in search operation
does not exist in memory.
No more room in memory for stor-
age of data.
Attempt to set an alarm that is al-
ready used for another entry.
Attempt to set an alarm for a time
or data that is already passed.
Error during data communica-
tions.