Specifications

— 8 —
5. If the units have another condition, reset as above.
• To change the parameters
1. Use the and — cursor keys to change the selected parameter on the display.
2. Use the and cursor keys to change the high-lighted setting of the currently selected
parameter.
3. Press to store them in memory.
5) Set up the slave machine
1. While an initial screen is displayed, press twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
2. Press 4 to select DATA COMM.
3. Press 2 to select RECEIVE.
6) Set up the customer’s machine.
1. While an initial screen is displayed, press twice to display the second function menu.
• You can perform the above operation while the initial screen of the Memo Mode, Schedule
Keeper, Calendar, or Reminder is displayed also.
* If the password isn't
registered in the SF unit,
display shows X instead
of "1".
2
∇
∇
∇
* If the password isn't
registered in the SF unit,
display shows X instead
of "1".
4