User Guide

E-73
Useful features
When you consider it as a problem
Troubleshooting
Symptom/Problem Most common causes Solutions
E01 appears on the display.
Changing modes without
completing transaction.
Return mode switch to where it
stops buzzing and press p.
E08 appears on the display.
Sign on operation is not
performed.
Prior to starting registration of
any other operation, press Z
~ < and then :.
E10 appears on the display.
Printer head (platen arm) is
opened or no paper roll.
Close the platen arm rmly or
enter paper roll.
No date on receipt.
Paper does not feed enough.
Printer is programmed as a
journal.
Program printer to print receipts.
Drawer opens after ringing once.
Department is programmed as
a single item dept.
Program the dept. as a normal
dept.
Not clearing totals at end of day
after taking report.
Using X mode to print reports. Use Z mode to print reports.
Programming is lost whenever
register is unplugged or at power
failure.
Poor or no batteries.
Put in new batteries and program
again.
Register does not work at all.
Can’t get money out of drawer.
No power. Pull lever underneath the drawer.
Useful features