User`s manual

Scanning PLU

Connect here

(SE-S300, SE-C300)

Summary

You can easily register items with barcode label by using barcode scanner.

Without programming any PLU code, unit price nor linked department, you can register the items and create the

PLU programming data automatically by not found PLU registration.

You can input the PLU code by scanning the code or enter the PLU code and press

manually.

The barcode system of this register is as follows:

Preparation

Just connect the HHS-15 handheld scanner (option) with the register.

1. Power off the register, and disconnect the AC plug from AC outlet.

2. Remove the connector cover.

3. Connect the scanner to the register and tighten two screws of the connector.

COM2/SCANNER COM1/PC

Connect here

(SE-S2000, SE-C2000)

4. Replace the connector cover, reconnect the AC plug and power on the register.

Scanning PLU code

Input method

Sample barcode

Scanner PLU code mamual input

EAN-13 (PLU type)

✔

13 digits with check digit

EAN-8 (PLU type)

✔

8 digits with check digit

UPC-A (PLU type)

✔

10/11 digits without check digit

UPC-E (PLU type)

✔

6 digits without check digit