User manual

Cypher Technology Ltd 2008

following dialogue box is shown. After the last disk, press the {Finish} button to close the

image file.

Fig 5. ImageMaker dialogue

The name of the new, combined image file is shown in the message window and is

generated from the original image file name and the current date and time.

Fig 6. ImageMaker final screen

The Checksum shown at the end should be the same as the checksum noted down

during the making of the Master. Restore the Master Image to a Flash Card

This single .img file can be accessed by WinImage in the normal way.

Restore the Image Back to a Card

Secondly, the disk image can be copied back to a flash card of equal or greater size

than the flash.img file (and therefore the original Flash card). This copied flash card will

behave as an exact clone of the original allowing, for example, the un-erasing of files

and the forensic examination of file allocation addresses and access dates. On Puma

this task is performed by the Restore Master function (see Section 4.8).