User manual

Cypher Technology Ltd 2008

Pressing the {Exit} soft key to returns to the top level.

4.6 Make Master Copy

This function will make a bit for bit copy of the whole of the Flash card to a DVD or CD.

This is a Master Copy.

Press the {Menu} soft key to enter the Menu system. The Up/down arrow keys are used

to select the desired function. Make Master is number 2 in the list of possible functions.

If it not already displayed, press the [Up Arrow] or [Down Arrow] until “Make Master” is

shown in the display. Insert a blank DVD or CD and press the [Go] soft key to execute

the function. Note that the whole card is backed up (see below) and therefore if DVD or

CD size is smaller than the Card size, multiple disks will be created. On successful

completion the disk is ejected.

Pressing the {Exit} soft key returns to the top level.

4.7 Verify Master Copy against Flash Card

This function will check that the contents of the Master Disk are identical to the inserted

Flash card.

Press the {Menu} soft key to enter the Menu system. The Up/down arrow keys are used

to select the desired function. Verify Master is number 3 in the list of possible functions.

If it not already displayed, press the [Up Arrow] or [Down Arrow] until “Verify Master” is

shown in the display. Insert the Master DVD or CD and the Flash card in the appropriate

Flash slot. Press the [Go] soft key to execute the function. When completed the

checksum of the Flash card (and the disk) is displayed.

Pressing the {Exit} soft key to returns to the top level.

4.8 Restore the Master Copy to a Flash Card

This function will copy the contents of the Master Disk to the inserted Flash card. This

Flash card will become a precise clone of the original card.

Press the {Menu} soft key to enter the Menu system. The Up/down arrow keys are used

to select the desired function. Restore Master is number 4 in the list of possible

functions. If it not already displayed, press the [Up Arrow] or [Down Arrow] until “Restore

Master” is shown in the display. Insert the Master DVD or CD and a Flash card that is

the same size or bigger than the original. Press the [Go] soft key to execute the

function. When completed the checksum of the Flash card (and the disk) is displayed.

This card is functionally identical to the original. It may be inserted back into the camera

or may be read on a computer and the images viewed or the files accessed.

Pressing the {Exit} soft key to returns to the top level.

4.9 Wipe Flash Card

This function will perform a forensic wipe of the Flash card. No data will be recoverable

from the card after this operation (see below).