Specifications

— 15 —
(8) Turn the camera on and set it on PLAY mode.
(9) Boot the adjustment program (ADJ821A.EXE).
(10) Load the saved data of the lens unit.
(11) Transfer the data to the camera.
Click Trans button on ADJ window.
“send OK” will be shown.
(12) Turn the camera off.
(13) Booting the test mode, be sure that each adjustment item is YES.
Power on while pressing DISP and MENU keys simultaneously.
(14) Check the camera operation by shooting a picture and play it back.
ADJUSTMENT
ZOOM OK KIZU OK
WB OK ZTRACK OK
IRIS OK STROBE OK
SHUTTER OK VCOM OK