Specifications

— 12 —
(5). Insert the adjustment data floppy disc which comes with the lens ass’y in a PC and load the adjustment
data.
File (F) -> Open (O)
Select floppy disc drive
Select adjustment data which has extension “adj” and load it. If there is no extension “adj”, the file will
not be shown. In such a case, put the extension utilizing windows’ explorer.
Adjustment data file name; 715XXXXX.adj
(XXXXX; 5-digit serial number)
* This number is printed on a seal stuck on the side of the lens unit.
(6). Transfer the adjustment data to the camera.
Click Trans button on the adjustment program.
Send OK will be shown.
(7). Turn the camera on.
(8). While pushing SHIFT and MENU keys, turn the power on to set the camera in the test mode and make
sure that all the adjustment items are "YES".
(9). Check the performance by shooting, playing back, and erasing pictures.
(10). Perform the flash adjustment (important).
STROBE
KIZU
ZOOM
FOCUS
YES
YES
YES
YES
CCD1
CCD2
YES
YES