Specifications

— 11 —
4. Adjustment
4-1. Color adjustment data writing
4-1-1. Note
(1) Set of lens ass’y adjusted in the factory and a floppy disc containing the lens’ adjustment data are
provided as a spare part.
(2) These adjustment data are stored in the EEPROM on CMD-PCB.
(3) Help command on adjustment window cannot be used as it uses Japanese system.
4-1-2. The example which must be adjusted
It is necessary to write color adjustment data for the replacements of the following units.
(1) Lens ass'y : [4-1-3]
(2) CMD-PCB : [4-1-4]
4-1-3. To replace the lens ass'y
(1) Replace the lens ass’y.
(2) Connect an AC adaptor and PC link cable to the camera.
(3) Turn the camera on to set it on PLAY mode.
(4) Boot adjustment program adj715.exe.
At this time, each adjustment data are 0.