Specifications

— 9 —
2. Test mode
Note: Do not perform the menu item unless explained here. (It may damage the internal data and
camera becomes unusable.)
2-1. Booting
To boot the test mode;
Turn the camera on while pressing DISP and MENU buttons.
To boot MENU1
Press PREVEIW ➜ PREVEIW ➜ MENU keys in order rapidly.
To boot MENU2
Press FLASH ➜ FLASH ➜ MENU keys in order rapidly.
* To execute
Use + or – keys to select a test item then press shutter button to execute it.
To boot MENU3
Press SELF ➜ SELF ➜ MENU keys in order rapidly.
2-2. Item for testing
1 TEST MODE
2 MENU1
MENU1
1.
2.
3.
4.
5.
6.
7.
8.
INIT.NTSC JAPANESE
LED+SUBLCD
INIT.NTSC ENGLISH
CROSS HATCH
ANG DET CHECK
INIT.PAL ENGLISH
COLOR BAR
50PERCENT GRAY
TEST MODE
PROG 99.08.16.13.38
GMENU 99.07.12.15.04
LOADER 0X00000007
ADJ
MOTOR 0X0000011A
POWER 0X1A
CCD ADJ1 YES
CCD ADJ2 YES
STROBE ADJ YES
ZOOM ADJ YES
FOCUS ADJ YES
• TEST MODE
• PROGRAM Version
• Graphic Menu Version
• Loader Version
• ADJ Version
• Motor MCU Version
• Power MCU Version
• CCD ADJUST 1 (Yes/No/NG)
• CCD ADJUST 2 (Yes/No/NG)
• STROBE ADJUST (Yes/No/NG)
• ZOOM ADJUST (Yes/No/NG)
• FOCUS ADJUST (Yes/No/NG)
Shown in green if all the adjustments
have been done.
YES when adjustments are completed.
NO when adjustments are incomplete.
NG if adjustments are failed.