Specifications

— 9 —
3 V RAM
It is used for encoder function.
4 Flash Memory
Up to 96 images can be stored in memory. Flash memory does not require electrical power
to store data, so image data is retained in memory even when you turn camera power off.
If batteries go dead, simply load a set of new batteries or connect the AC adaptor and you
will be able to view images in camera memory.
Memory Map
5 D RAM
There is area of work space that the microprocessor uses for storing temporary data , the
intermediate results of calculations, and all sorts of pieces of information that the system
needs to remember.
Terminal Voltage Purpose
VCC3-0 4.75 ~ 5.15 (V) Logic circuit
VCC3-1 4.70 ~ 5.15 (V) Video output
VCC3-2 4.60 ~ 5.15 (V) Digital I/O
VCC6 17.80 ~ 18.20 (V) CCD
VEE3 -9.6 ~ -10.6 (V) CCD
6 Power Supply
BUTTON RESISTOR
CPU
VCC3-1
87 pin
88 pin
89 pin
KEY 0
KEY 1
KEY 2
KEY PCB
Key Matrix
VOLTAGE BUTTON RESISTOR KEY MATRIX CPU
VCC3-1 Shutter R900(1.8K) KEY0 87pin
VCC3-1 [+] R901(15K) KEY0 87pin
VCC3-1 MODE R902(1.8K) KEY1 88pin
VCC3-1 DISP R903(4.7K) KEY1 88pin
VCC3-1 ZOOM R904(10K) KEY1 88pin
VCC3-1 SELF R905(27K) KEY1 88pin
VCC3-1 [-] R906(1.8K) KEY2 89pin
VCC3-1 DEL R907(15K) KEY2 89pin
Block Diagram
Header Image data Color
record Max; 96 images Information
3 V RAM
It is used for encoder function.
4 Flash Memory
Up to 96 images can be stored in memory. Flash memory does not require electrical power to store
data, so image data is retained in memory even when you turn camera power off.
If batteries go dead, simply load a set of new batteries or connect the AC adaptor and you will be able
to view images in camera memory.
5 D RAM
There is area of work space that the microprocessor uses folr storing temporary data, the intermediate
results of calculations, and all sorts of pieces of information that the system needs to remember.
6 Power supply