Specifications

R-53
QT-6100 Reference Manual
? : Force to execute the arrangement even if an error occurred during the
arrangement.
ANO : Disable clerk auto sign-off.
AYES : Enable clerk auto sign-off.
CFFMT :Format CF card.
CFSVnnn’mmmm’ :Backup to CF card (nnn: command code, mmmm: file name).
CFLDnnn’mmmm’ :Restore from CF card (nnn: command code, mmmm: file name).
JCL : Clear electronic journal older half data
JCLA
: Clear all electronic journal data
CLPn : Set the default @ menu sheet number to “n” (n = 0 ~ 2) and “stay down
@ menu sheet assignment” of all clerk.
CLMn : Set the default menu sheet number to “n” (n = 0 ~ 15) and “stay down
menu sheet assignment” of all clerk.
CLSn : Set the default shift PLU level number to “n” (n = 0 ~ 8).
211: : Press the “ESC” key.
212: : Press the “YES” key.
213: : Press the “NO” key.
%GET : Read from key buffer.
%PUT : Write to key buffer.
CLL0n : Set the default clerk pop-up window number to “n” (n = 0 ~ 9).
!:sss : Wait the next step for “sss” (ss = 001 ~ 327) sec.
F:m:nn : Sending data (designated by “nn”) to the terminal (designated by “m”)
via FTP.
“m” means the rec-# of file-912, “nn” means the rec-# of file-913
6) End of the arrangement programs
The end command “E” must be included at the end (exit) point of an arrangement program.