Electronic Keyboard User Manual
E-26
Playing Demo Songs
Adjusting the Song Volume
You can use the following procedure to adjust the 
volume level of the song’s Auto Accompaniment, 
without affecting the volume of keyboard tone output.
For details, see “Song Volume” (page E-44).
Practicing Either Hand’s Part (Part Off)
You can turn off the right hand part
*1
 or left hand 
part
*2
 of a song and play that part on the Digital Piano 
while the song plays back.
1.
Press the 
bt
 (PART) button.
This causes “L-[ON] R-[ON]” to appear on the display.
2.
Use the 
ct
 (w, q) buttons to turn off the 
part you want.
Press (w) to toggle the left hand part or (q) to toggle 
the right hand part on and off.
3.
Press the 
bt
 (PART) button again.
This exits the part on/off screen.
4.
Hold down the 
bn
 (USER SONGS) button for 
at least two seconds.
• This will assign the same tone as the hand that is 
turned off to the keyboard.
5.
Press the 
bs
 (PLAY/STOP) button to start 
song playback.
The part you turned off does not sound, so you can play 
it on the keyboard.
Sounding a Count at the Beginning of a 
Song
You can configure the Digital Piano to sound a count 
before playback of a song starts, which helps to get the 
timing right when you are playing along on the 
keyboard. For details, see “Pre-count” (page E-45).
Repeating Playback of a Specific Section 
(Repeat)
You can configure the Digital Piano to repeat the 
section of a song you want to practice. You could, for 
example, specify repeat play from measure 5 to 
measure 8.
1.
Press the 
bs
 (PLAY/STOP) button.
This starts playback of the song.
2.
When playback reaches the first measure of 
the section you want to repeat, press the 
bo
(REPEAT) button.
This makes the measure the “start measure”.
The 
bo
 (REPEAT) button lamp flashes at this time.
3.
When playback reaches the last measure of 
the section you want to repeat, press the 
bo
(REPEAT) button again.
This makes the measure the “end measure”.
Repeat playback of the specified section starts as soon 
as you select the end measure.
The 
bo
 (REPEAT) button lamp is lit (not flashing) at 
this time.
4.
Pressing 
bo
 (REPEAT) again returns to 
normal play.
This will cause the 
bo
 (REPEAT) button lamp to go out.
*1 Song data Channel 4 (fixed)
*2 Song data Channel 3 (fixed)
Start End
These measures are repeated.










