User Manual

EN-8
■ Connecting the Digital Piano to Your Computer
• Make sure you follow the steps of the procedure below
exact
ly. Connecting incorrectly can make data sen
d
and
receive impossible.
1. Turn off the Digital Piano and then start up
your computer.
• Do not start up the music software on your computer
yet!
2. Use a commercially available USB cable to
connect the cp USB Type B port of the Digital
Piano to your computer.
• Use a USB 2.0 or 1.1 A-B connector type USB cable.
3. Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer
, the driver software required to
send and receive dat
a will be installed on your
computer
automatically.
4. Start up commercially available music software
on your computer.
5. Configure the music software settings to select
“CASIO USB-MIDI” as the MIDI device.
• For information about how to select the MIDI device,
see the user documentation that comes with the
music
software you are using.
• Be sure to turn on the Digital Piano first before starting
up your computer’s music software.
• USB send and receive is disabled during playback of
a
son
g.
• Once you are able to connect successfully, there is no
pro
blem with leaving the USB cable connected w
hen you
turn
off or turn on your computer and/or Digital Piano.
• For detailed specifications and connections that ap
ply to
MIDI da
ta send and receive by this Digital Piano, se
e the
latest suppo
rt information provided by the website at th
e
URL below
.
https://support.casio.com/global/en/emi/manual/PX-S3100/
• For information about MIDI settings, refer to “Configuring
MIDI Settings” in the User
’s Guide.