User Manual
Table Of Contents
- Contents
- Sounding a Bluetooth® Audio Capable Device (Bluetooth Audio Pairing)
- Connect the Digital Piano with a Bluetooth Low Energy MIDI Device
- Connecting and Using a Smart Device App with Bluetooth Wireless Technology
- Enabling and Disabling the Digital Piano’s Wireless Function
- Adjusting the Notification Tone Volume Level
- Checking the Bluetooth Connection Status
- Playing Sound from External Audio Equipment Through the Digital Piano’s Speakers
- Outputting Digital Piano Notes Through an Amp or Audio Equipment
- Connecting to a Computer
EN-1
You can use the included Wireless MIDI & audio adaptor to
pair the Digital Piano with a Bluetooth audio device and sound
the playback of the external device from the Digital Piano’s
speakers.
• Before performing the pairing operation, turn down the
volume levels of the Digital Piano and the external
device.
• If external device notes sounded by this Digital Piano
are distorted, lower the external device’s volume level.
• Due to Bluetooth characteristics, you may notice some
lag in notes. If that happens, connect using a USB
cable.
■ To pair the Digital Piano with a Bluetooth Audio
Capable Device
1.
Connect the Wireless MIDI & audio adaptor to
the cq USB Type A port.
2.
On the Bluetooth setting screen that appears
on the external device, turn on the Bluetooth
function if it is off.
3.
Hold down the bp^ button until “[FUNCTION]”
appears on the display. Then release the
button.
This enters the FUNCTION mode.
4.
Use the bk U and bl I buttons to display
“WIRELESS”, and then touch bm ENTER.
5.
Use the bk U and bl I buttons to display
“Audio Pairing” and then touch bm ENTER.
This causes the Digital Piano’s Bluetooth indicator to
flash, which indicates pairing standby.
• If the Digital Piano’s wireless function is turned off, it
will turn on automatically.
6.
Use the setting screen of the Bluetooth audio
capable device to select “WU-BT10 AUDIO” to
pair with this Digital Piano.
• When pairing is complete, the Digital Piano’s Bluetooth
indicator stops flashing and a piano tone notification
sounds.
• Now output from the external device will sound from
the Digital Piano’s speakers.
7.
To exit the FUNCTION mode, hold down
bp EXIT until “[FUNCTION]” disappears from
the display.
• You need to turn on both the Digital Piano’s wireless
function and the Bluetooth audio capable device’s
Bluetooth function.
• To change the Digital Piano’s wireless settings, see
“Enabling and Disabling the Digital Piano’s Wireless
Function” (page EN-4).
• Information about the last Bluetooth audio capable devices
connected to this Digital Piano is registered by the Wireless
MIDI & audio adaptor. Because of this, it can automatically
perform Bluetooth audio pairing with the same device, so
you will not need to perform the Bluetooth audio pairing
operation again.
Sounding a Bluetooth
®
Audio
Capable Device (Bluetooth Audio
Pairing)
Wireless MIDI & audio adaptor
cq USB Type A port