User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Digital Piano Operations
- Listening to Demo Play
- Selecting a Tone
- Changing Keyboard Response to Touch Pressure (Touch Response)
- Changing the Pitch
- Using the Sound Mode Effects (Hall Simulator/Reverb and Surround)
- Using a DSP
- Using Chorus
- Using Brilliance
- Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator)
- Using the Knobs
- Using the Pitch Bend Wheel
- Using the Arpeggiator
- Splitting the Keyboard for Duet Play
- Changing the Scale Tuning (Temperament) of the Keyboard
- Using Auto Accompaniment
- Selecting a Rhythm
- Playing Auto Accompaniment
- Auto Accompaniment Pattern Variations
- Triggering Auto Accompaniment Play with Accompaniment Keyboard Input (Synchro Start)
- Using the Keyboard to Control the Auto Accompaniment Pattern (Keyboard Controller Mode)
- Selecting a Chord Input Mode
- Using One-Touch Preset
- Using Auto Harmonize
- Changing the Auto Accompaniment and Song Tempo
- Using Music Preset
- Registering and Restoring a Setup (Registration)
- Using the MIDI Recorder to Record Performances
- Using the Audio Recorder to Record Performances
- Listening to Songs (MIDI Player)
- Configuring Function Settings (FUNCTION Mode)
- Using Operation Lock
- Configuring MIDI Settings
- Deleting All Data in Digital Piano Memory
- USB Flash Drive
- Supported USB Flash Drives
- USB Flash Drive and USB Type A Port Handling Precautions
- Connecting a USB Flash Drive to and Detaching It from the Digital Piano
- Formatting a USB Flash Drive
- USB Flash Drive Operations
- Using a Computer to Copy General Song Data to a USB Flash Drive
- Storing Standard Audio Data (WAV Files) to a USB Flash Drive
- Linking with a Smart Device (APP Function)
- Troubleshooting
- Reference
- MIDI Implementation Chart
Digital Piano Operations
EN-42
5.
Touch one of the buttons from br Area 1
through ck Area 4 to select the area where the
setup you want to recall is located.
This recalls the setup.
• This causes the Digital Piano’s settings to change in
accordance with the setup you recalled.
■ Freeze Function
Recalling a registered setup normally overwrites all of the
settings shown under “Registration Memory Data” (page
EN-40). You can also use the freeze function to specify
particular settings that should not be overwritten when a setup
registration is recalled.
For FUNCTION parameter numbers 59 to 70 (parameters
included in 58 “FREEZE”) select either “On” (maintain current
setting) or “Off” (overwrite current setting) to specify what
should happen when a setup is recalled.
• For information about what settings are maintained when
“On” is selected for a FUNCTION parameter number, see
“Registration Memory Data” (page EN-40).
• For information about FUNCTION parameters, see
“Configuring Function Settings (FUNCTION Mode)” (page
EN-53).
You can configure Digital Piano settings so each press of a
pedal scrolls through and selects setups you registered with
the registration function.
■ To specify the pedal for recalling setups
1.
Hold down the bp^ button until “[FUNCTION]”
appears on the display.
This enters the FUNCTION Mode.
2.
Use the bk U and bl I buttons to select the
following menu items in sequence:
“REGISTRATION” 3 “SEQ PED RECALL”.
3.
Use the bk U and bl I buttons to select a
pedal jack and then touch bm ENTER.
4.
Use the bk – and bl + buttons to change the
pedal jack setting.
• For information about pedal operations that can be
performed while each setting is selected, see “To play
using the sequential pedal recall function” (page
EN-43).
• Specifying “Inc” or “Dec” for a jack will cause the pedal
connected to it to function as a registration setup recall
pedal only. Any functions assigned to the jack by
“Damper Target” (page EN-7) or “Exp/Asgn Target”
(page EN-9) will be disabled for that jack.
5.
To exit the FUNCTION mode, hold down
bp EXIT until “[FUNCTION]” disappears from
the display.
[
REG I STRAT I ON
]
AREA 1
Bank : 02
Using a Pedal to Cycle Through Multiple
Setups (Sequential Pedal Recall)
To select this pedal jack: Display this:
cr DAMPER PEDAL jack Damper Pedal
dl EXPRESSION/ASSIGNABLE jack Exp/Asgn Pedal
To do this: Display this:
Enable pedal recall so setups scroll
forward
Inc
Enable pedal recall so setups scroll
back
Dec
Disable pedal recall Off