User Manual

7.6 Pan (0AH)

Message Format: BnH 0AH vvH

n: MIDI Channel Number

vv: Value(Note1)

Note1: For information about the relationship between setting values and send/receive values, see “13.4 Pan Setting Value

Table” in “IV Setting Values and Send/Receive Values”.

Transmit Sent When MIDI setting of Accomp Out set to ON and when automatic accompaniment is

used. (PX-S3000)

Receive Receipt changes the pan of the corresponding part.

7.7 Expression (0BH)

Message Format: BnH 0BH vvH

n: MIDI Channel Number

vv: Value

Transmit Sent when the pedal is operated by setting. (PX-S3000)

Sent when MIDI setting of Accomp Out set to ON and when automatic accompaniment is used.

(PX-S3000)

Receive Receipt changes the Expression value.

7.8 Damper Pedal (Sustain) (40H)

Message Format: BnH 40H vvH

n: MIDI Channel Number

vv: Value

Receive Receipt performs an operation equivalent to a sustain pedal operation.

Timbre Type Speciﬁc Operation This operation diﬀers in accordance with the Timbre Type (see

“About the Timbre Type” in “8 Program Change”) setting.

• Timbre Type: Melody,Hex Layer

Sustain oﬀ/on control is performed in accordance with the value of the received message. For

information about the relationship between setting values and send/receive values, see the  13.1

Oﬀ/On Setting Value Table in IV Setting Values and Send/Receive Values .

• Timbre Type: Piano

Continuous control of the following is performed in accordance with the value of the received

message.

– Piano note decay rate

For information about the relationship between setting values and send/receive values, see 13.2

Sustain Pedal Setting Value Table in IV Setting Values and Send/Receive Values. 