User Manual

EN-32
Configuring Settings with the Keyboard
■ MIDI and Other Settings
Parameter Settings
Operation
Type
(page
EN-25)
Description Remarks

USB flash drive
mode
MIDI, Storage
Default: MIDI
DThe Digital Piano enters MIDI
mode automatically when it is
connected to a computer by a USB
cable. Select storage when saving
Recorder memory song data to a
computer or when loading
computer song data to Digital
Piano memory. (page EN-46)
• After this setting is changed to Storage, the
GRAND PIANO, E.PIANO 1, and R lamps
will flash, and all other lamps will be unlit.
• All Digital Piano operations are disabled at
this time.
• Each press of the USB device mode
keyboard key toggles between the MIDI
and storage modes.

Local control
Off, On
Default: On
D Selecting “Off” for Local control
cuts off the Digital Piano’s sound
source, so no sound is produced by
the Digital Piano when keys are
pressed.

Send channel
1 to 16
Default: 1
B Specifies one of the MIDI channels
(1 through 16) as the Send channel,
which is used for sending MIDI
messages to an external device.

Audio Recorder
Volume
(PX-870)
00 to 42
Default: 42
B You can adjust the volume level of
audio data recorded to a USB flash
drive.
• The volume level cannot be adjusted while
recording.

Operation tone
Off, On
Default: On
D Selecting “Off” disables sounding
of the operation tone whenever a
keyboard key is pressed while the
FUNCTION is depressed.
• This setting is retained even when the
Digital Piano is turned off.

Panel lock
Off, On
Default: Off
D Selecting “On” for this setting locks
the Digital Piano’s buttons (except
for the P (Power) button and the
buttons required for unlock), so no
operation can be performed.
Turn on operation lock when you
want to protect against
unintentional button operations.