User Manual

Note2: For information about the relationship between setting values and send/receive values, see “12.11 Octave Shift Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Note3: For information about the relationship between setting values and send/receive values, see “12.6 Pan Setting Value
Table” in “IV Setting Values and Send/Receive Values” of this do cument.
Hex Layer Detune
Parameter MSB LSB Notes
Detune 56H 00H Note1
Note1: For information about the relationship between setting values and send/receive values, see “12.10 Hex Layer Detune
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
7.25 RPN (64H,65H)
Message Format: BnH 64H llH (LSB)
BnH 65H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
7.25.1 Pitch Bend Sensitivity
Message Format: BnH 64H 00H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value(00H - 18H)
ll: LSB Value(Transmit:00H, Receive:Ignored)
Transmit Sent when Bend Range of any part is changed.
Receive Receipt changes Bend Range of the corresponding part.
7.25.2 Fine Tune
Message Format: BnH 64H 01H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value
ll: LSB Value
Transmit Sent when the fine tune of any part is changed.
15