MIDI Implementation

Note1: For information about the relationship between setting values and send/receive values, see “12.6 Pan Setting Value
Table” in “IV Setting Values and Send/Receive Values”.
Transmit Sent when the pan of any part is changed.
Receive Receipt changes the pan of the corresponding part.
7.7 Expression (0BH)
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when Auto Acompanishment is used and during recorded song playback.
Receive Receipt changes the Expression value.
7.8 Hold1 (40H)
Message Format: BnH 40H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when a pedal that has a sustain (damper) function is operated.
Receive Receipt performs an operation equivalent to a sustain pedal operation.
Timbre Type Specific Operation This operation differs in accordance with the Timbre Type (see
“About the Timbre Type” in “8 Program Change”) setting.
• Timbre Type: Melody,Hex Layer
Sustain off/on control is performed in accordance with the value of the received message. For
information about
the relationship between setting values and send/receive values, see the“12.3 Off/On Setting Value
Table ”in
“ IV Setting Values and Send/Receive Values ”.
• Timbre Type: Piano
Continuous control of the following is performed in accordance with the value of the received
message.
– Piano note decay rate
For information about the relationship between setting values and
send/receive values,
see“ 12.4 Sustain Pedal Setting Value Table ”in“ IV Setting
Values and Send/Receive Values. ”
9