MIDI Implementation

7.24 NRPN (62H,63H)
Message Format: BnH 62H llH (LSB)
BnH 63H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
7.24.1 Part Enable
Message Format: BnH 62H 00H
BnH 63H 22H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Transmit:00H, Receive:Ignored)
Note1: For information about the relationship between setting values and send/receive values, see the “12.3 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when a mixer part on/off setting is changed.
Receive Receipt changes the mixer part on/off setting.
7.24.2 DSP Parameter
DSP parameters can be changed by NRPN. The relationship between each parameter and NRPN numbers
is shown below.
7.24.3 Tone
Tone parameters can be changed by NRPN. The relationship between each parameter and NRPN num-
bers is shown below.
Hex Layer Edit
Parameter MSB LSB Notes
Layer On/Off 5XH 00H Note1
Octave Shift 5XH 01H Note2
Pitch LFO Depth 5XH 02H
Filter LFO Depth 5XH 03H
Amp Volume 5XH 04H
Amp Pan 5XH 05H Note3
Amp LFO Depth 5XH 06H
DSP On/Off 5XH 07H Note1
Note: X 0 through 5 correspond respectively to Layers 1 through 6.
Note1: For information about the relationship between setting values and send/receive values, see “12.3 Off/On Setting Value
Table” in “IV Setting Values and Send/Receive Values” of this document.
14