User manual - PX3_midi

25
11.2 About DSP
11.2.1 DSP Line Structure and Assignment
This Instrument has two DSP lines that can be used simultaneously.
Selecting multiple tones with DSP at the same time creates the possibility that there will not be enough DSP lines. If this
happens, DSP lines will be assigned in accordance with the DSP line assignment priority specified for each part.
When two or more parts have the same priority, the assignment that was made last is given priority.
For details about DSP line assignment priority, see the table under “1.2.2 Sound Generator Parts”.
12 Channel Aftertouch
Format
Send
This message is not sent by this Instrument.
Receive
Receipt of this message adds modulation to the voice that is sounding.
The modulation effect differs according to the tone being used.
13 Pitch Bend Change
Format
Send
Sent in the following cases.
• When the bend wheel is operated
• When a MIDI channel is specified by a zone edit operation
Receive
Receipt of this message changes the pitch of the currently sounding voice. Pitch bend change sensitivity depends on the
setting configured with “9.24.1 Pitch Bend Sensitivity”.
Message Format: DnH vvH
n: MIDI Channel Number
vv: Value
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB