User manual - Chapter 9 Secret Function

114
3. Use an optional SB-90 9-9 pin connector to connect the two cradles to
each other.
• All data communication settings must be made on only one of the PV
Units only. This unit is called the host unit, while the other unit is called
the terminal unit.
To send data from the host unit to the terminal unit
1. After connecting the two PV Units, turn on the host unit.
• Terminal unit power should still be off at this time.
2. Display the list view in a mode whose data can be sent with this setup.
• This configuration supports transfer of Contacts (Business, Personal,
Untitled 1-5), Memo (Untitled 1-5), Schedule, To Do, Reminder, Expense
Manager, and Quick-Memo data.
Start button
Cradles
Off
Esc
Light
Menu
Scheduler
Contacts
Memo
Quick
Memo
Menu
Ber
Off
Esc
Light
Menu
Scheduler
Contacts
Memo
Quick
Memo
Menu
Ber
SB-90 9-9 pin connector
Host unit Terminal unit