User manual - Chapter 12 PV Application

ManualsBrandsCasio ManualsPDAPV-S250

155

The System menu provides you with a number of items that you can use to

set up the unit to suit your particular needs.

Note that the System menu is available on the menu bar while the Mode

Menu is on the display.

Chapter

Configuring the Unit

Setting the Date, Time, and Auto Power Off Interval................ 156

Turning Sound On and Off .......................................................... 157

Setting a Daily Alarm Time.......................................................... 158

Setting the Date, Time, Calendar, and Keyboard Formats ....... 159

Setting the System Language ....................................................... 160

Adjusting Display Contrast.......................................................... 161

Calibrating the Touch Screen ...................................................... 161

To calibrate the touch screen .................................................................... 161

Checking Memory Capacity ........................................................ 162

To check memory capacity ....................................................................... 162

Memory Management .................................................................. 162

To perform memory management ............................................................ 163

Summary of content (10 pages)

PAGE 1
Chapter 12 Configuring the Unit The System menu provides you with a number of items that you can use to set up the unit to suit your particular needs. Note that the System menu is available on the menu bar while the Mode Menu is on the display. Setting the Date, Time, and Auto Power Off Interval ................ 156 Turning Sound On and Off .......................................................... 157 Setting a Daily Alarm Time ..........................................................
PAGE 2
Setting the Date, Time, and Auto Power Off Interval 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Set date/time. • You can also display the date/time setting screen by tapping the clock on the pop up tool screen (page 102). 2. Tap the date next to Set date. This causes a date keyboard to appear. 3. Use the date keyboard to input the date you want to set, and then tap NEXT. • You can specify a date within the range of January 1, 1901 to December 31, 2099. 4.
PAGE 3
Chapter 12 Configuring the Unit Turning Sound On and Off 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Sound. 2. Tap a check box to toggle the corresponding item’s sound on (checked) and off (unchecked). • Scheduler alarms turns all Scheduler Mode alarms on and off. • Alarm turns the daily alarm on and off. • Key tone turns the key input confirmation tone on and off. • See “Setting a Daily Alarm Time” on page 158 for details about setting the alarm time. 3.
PAGE 4
Setting a Daily Alarm Time 1. While the sound on/off setting screen is on the display in the above procedure, tap on the time to the right of the Alarm item. • You can also display the alarm setting screen by tapping the alarm indicator on the pop up tool screen (page 102) or the clock screen (page 103). 2. Input the time you want to set, and then tap NEXT. • While the Daily Alarm is turned on, a tone sounds for about 20 seconds at the preset time each day.
PAGE 5
Chapter 12 Configuring the Unit Setting the Date, Time, Calendar, and Keyboard Formats 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Format. 2. Tap the date format next to Date. • Each tap of the date format changes it in the cycle: M/D/Y fi D/M/Y fi Y/M/D fi M/D/Y, etc. 3. After setting the date format, tap the time format next to Time. • Each tap of the time format toggles it between 12 and 24. 4. After setting the time format, tap the day of the week next to Week format.
PAGE 6
Setting the System Language 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Language. 2. Tap the button next to the language you want to select as the system language. 3. Tap Set to register your setting. • All on-screen text messages appear in the language you set as the system language. Note • The system language you set also affects the keyboard format (page 169) and the code keyboard contents (page 142).
PAGE 7
Chapter 12 Configuring the Unit Adjusting Display Contrast 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Contrast. 2. Tap H to make the figures on the screen lighter, or J to make them darker. 3. To return to the initial default contrast setting, tap Initial. 4. After the setting is the way you want it, tap OK.
PAGE 8
Checking Memory Capacity Use the following procedures when you want to check current memory capacity. To check memory capacity 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Capacity. Memory used Memory still available 2. Tap OK to clear the memory capacity screen. Memory Management The memory of your PV Unit is designed to make your normal data input and recall operations as quick and efficient as possible.
PAGE 9
Chapter 12 Configuring the Unit To perform memory management 1. Tap the Menu Bar icon to display the menu bar, and then tap System – Memory management. 2. In response to the message that appears, tap Yes to start memory management or No to close the dialog box without doing anything. • The message shown below appears after you tap Yes to start memory management. • You can tap Esc at any time to interrupt the memory management procedure.
PAGE 10