Quick Start

Getting Ready to Use the Product
Press the Power
button on the watch.
●
Activate the Bluetooth® connection on your smartphone.
●
Place the smartphone to be paired close to the watch (1 m or closer recommended).
● 
This description shows typical screen transitions.
！
●
The “Wear OS by Google™” app
must be installed.
●
Ensure that the watch is fully charged.
Install the “Wear OS by Google” app.
1
1
Launch Wear OS
by Google on the
smartphone.
1
Tap the
screen.
2
Update the Google Play Developer service to the latest
version.
2
Update the Google app to the latest version.
3
Install the CASIO MOMENT SETTER+ app.
4
Procedures on the smartphone Procedures on the watch
* Android-only procedure. CASIO MOMENT SETTER+ is recommended,
but is not essential.
・Android™ 4.4 or later (excludes Go editions)
・iOS 9.3 or later Refer to the User's Guide for details.
* Some functions are not available when the phone is
connected to an iOS device.
(Use the latest version. Older versions for Android Wear™ 1.x cannot be used.)
Supported mobile phones
(as of December 2018)
＊
＊
＊
Select the
language to be
used.
3
On the watch On the watch
Pairing the watch with your smartphone
1
Tap “SET IT UP”.
Tap “CASIO
WSD-F20”.
2 3
When the pair settings screen appears,
check the passkey and tap “PAIR”.
4
Getting your watch
details may continue
for some time.
The same passkey shown on
the smartphone screen appears
on the watch screen.
5
Set only the accounts to be
synchronized to ON and then
tap “Next”.
6
Tap “Copy”.
7
Enter the password
and tap “SIGN IN”.
8
Connection is
completed.
10
Tap “DONE”.
follow the instructions provided on the screen.
9
Always make copies of the accounts. Important
product auto updates will not function.
settings
on the watch in “Pairing the watch with your smartphone ”.
Android settings
！
Power
button
Important
！
Important
2
This Quick Operation Guide shows typical screen displays and operations.
* The image shows the WSD-F30.
Quick Operation Guide