User`s guide

E-29

English

Assembling the Stand

PREPARATION

• Before starting assembly, check to make sure that

you have all the parts shown below. You can find

the screws in a plastic bag inside of the polystyrene

foam packing material.

• This stand does not include any of the tools required

for assembly. It is up to you to prepare a large

Philips head (+) screwdriver for assembly.

*CAUTION

• The stand should be assembled by two people

working together.

• The stand should be assembled on a flat surface.

• Do not remove the tape securing the keyboard cover

in place until assembly is complete. Removing the

tape can cause the keyboard cover to open and close

during assembly, creating the risk of personal injury

to your hands and fingers.

• Take care that you do not pinch your fingers

between parts when assembling them.

• When placing the digital piano on the floor, be sure

to place it on something soft (a blanket, cushion,

etc.). Do not place the digital piano directly onto the

floor.

NOTE

• Be sure to follow the proper procedure when

assembling the stand.

PREPARATION

• Pull the pedal unit cable out from the pedal unit

Unpacking

Side panel ........................... ×1

Back board .......................... ×1

Screw caps.......................... ×6

Pedal unit ............................ ×1

Screws ................................ ×2

Clips .................................... ×2

Brackets .............................. ×2

Screw caps ......................... ×2

Screws ................................ ×4

Assembling the Stand