User`s guide

English
Recording and Play Back
E-19
The following procedure deletes a specific track of a
song.
IMPORTANT!
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in digital piano memory before you
perform the following steps.
1. Press the RECORDER button twice so its
lamp is flashing.
2. While holding down the FUNCTION button,
press the RECORDER (L/R) button to select
the track you want to delete.
3. Press the RECORDER button until its lamp is
lit.
• This will cause the lamp of the track you selected in
step 2 of this procedure to flash.
Example: If you selected Track 2 for deletion
4. Once again, hold down the FUNCTION
button as you press the RECORDER (L/R)
button.
• This deletes the selected track and enters playback
standby.
• To cancel the delete operation at any time, press the
RECORDER button twice so its lamp is unlit.
NOTE
• Only the digital piano’s RECORDER (L/R) button is
operational from step 3 until you actually perform
the delete operation in step 4. No other button
operation can be performed.
Deleting Recorded Data
Off Flashing: Delete standby